Program of the 146th ISIJ Meeting (October 11-13, 2003)
General Presentation Only

Current Advance in Materials and Process, Vol.16 ,No.4
High Temperature Processes

1   Analysis of the kaolin in iron ore by infrared spectrometry
    Y.Fujioka … 909

2   Improvement of granulating marra mamba ore by introducing the high speed agitating mixer T.Matsumura … 910

3   Improvement of granulation of raw materials with water soluble polymer
    (Development of the intensified granulation technique in iron ore sintering - 1) T.Okada … 911

4   Increase in productivity with water soluble polymer in commercial sintering plant
    (Development of the intensified granulation technique in iron ore sintering - 2) T.Okada … 912

5   The iron ore sintering process part 1 - Assessing blend sinterability Chin Eng Loo … 913

6   The iron ore sintering process part 2 - Zones in a sintering bed Chin Eng Loo … 914

7   The iron ore sintering process part 3 - Sintering bed pressure drop Chin Eng Loo … 915

8   Theoritical limit of the yield ratio in Dwight Lloyd process J.Shibata … 916

9   Influence of the melt fluidity on sinter structure formation S.Machida … 917

10   Iron ore blend sinterability part 1 - Influence of conditions Chin Eng Loo … 918

11   Iron ore blend sinterability part 2 - Influence of hematite-goethite ore Chin Eng Loo … 919

12   Production of low-slag sinter with consideration of melting behavior O.Ishiyama … 920

13   Improvement of sinter productivity and yield at Kashima No.3 sintering plant T.Okubo … 921

14   Enhancement of productivity and strength at Kimitsu No.3 sintering plant M.Takahashi … 922

15   Sintering operation with minimum burnt lime during the period of surplus electric power S.Shimomura … 923

16   Dynamic reduction-disintegration properties of goethite Baek Chan Yeong … 924

17   (Influence of microstructure on the reduction behaviour of hematite - 2 ) K.Higuchi … 925
18   Effect of dolomite sinter on reducibility by controlling minerals formation M.Matsumura … 926

19   Development of dioxin adsorption and decomposition material from the minerals in Aso district A.Gushima … 927

20   Effect of the oxides addition on the milling of iron oxide-carbon mixture R.Suzuki … 928

21   Observation of microstructure of iron made from (Fe,Al)2O3 by gaseous reduction K.Takahashi … 929

22   Rapid reduction behavior of fine iron ore carried by CH4 gas Y.Nomura … 930

23   Influence of the coal ratio and the slag basicity on productivity of reduction and smelting method N.Ishiwata … 931

24   Gasification reaction and bonding between carbon atoms of various carbon materials T.Karato … 932
25   TEM analysis of the effect of additional elements on the reduction of FeO induced by ion implantation N.Ishiakwa … 933

26   In-situ observation of diffraction plane spaces change of reduced FCC iron I.Seki … 934

27   Effective diffusivity and its temperature dependency of carbon composite agglomerate K.Nitta … 935

28   Formation behavior of iron and TiO2 from ilmenite ore by thermochemical reactions S.Hayashi … 936

29   Gaseous reduction behavior of partial reduced iron ore briquettes with CO-CO2 mixture S.Hayashi … 937

30   Effect of MgO on initial reduction of CaO-SiO2-containing wustite T.Inami … 938

31   Micro-segregation with two-phase cellular/dendritic eutectic solidification T.Himemiya … 939

32   Analysis of solidification sequence in austenite type stainless steel K.Yamamoto … 940

33   (ISIJ Research Promotion Grant)
    Heat transfer analysis for ferrous multi-component alloys using computational thermodynamics K.Ohsasa … 941

34   Phase selection in Sn-Ag3Sn eutectic alloy H.Esaka … 942

35   Microstructure and hardness of fine TiC particle dispersed FeAl alloy produced from melting and
     solidification after SHS reaction K.Matsuura … 943

36   Nitriding of titanium surface by micro-arc melting and its solidification structure H.Arita … 944

37   Crystallization from CaO-SiO2-TiO2 system for F free mold flux H.Nakada … 945

38   Effect of Na2O addition on crystallization behavior of CaO-SiO2-CaF2 glasses H.Hashimoto … 946

39   Primary field of cuspidine in cuspidine-CaF2-NaF system H.Nakada … 947

40   Observation of molten steel flow in submerged entry nozzle T.Kato … 948

41   Test of swirling flow immersion nozzle for wide slab casting S.Kosaka … 949

42   Development of high productivity at Fukuyama No.5 continuous casting machine T.Ikagawa … 950

43   Evolution of hydrogen gas form molten steel at initial stage of solidification H.Mizukami … 951

44   Effects of the wettability of nozzle end and fluid arourd droplet on generation of the droplet from the nozzle T.Kagawa … 952

45   Effect of wettability of sliding gate on attachment of bubbles to the gate J.Yoshida … 953

46   Effect of wettability on liquid flow in vortex mixer M.Aono … 954

47   Separation of gas-liquid based on wettability difference in inverted Y-junction K.Ishiguro … 955

48   Analysis of the behavior of cavitation multi-bubbles acoustically induced in liquid T.Kubo … 956

49   Generation behavior of the non-spherical bubble forming from the porous nozzle for liquid metal refining K.Okano … 957

50   Bubble formation from gas injection nozzle in ultra sound field K.Okumura … 958

51   What is the process on the verge of step? a parting of the way on technology developement K.Nagata … 959

52   Nano-technology and physical property measurements relevant to metallurgy M.Susa … 960

53   Current advances in research on sonoprocessing of materials M.Kuwabara … 961

54   Interaction between microwave and materials K.Morita … 962

55   Application of hydrothermal process to recycling of iron & steelmaking slag T.Tanaka … 963

56   Coal drying, heating and classification process on fluidized bed
    (Coal pre-treatment process of SCOPE21) A.Suzuki … 964

57   Effect of rapid preheating of coal on coke strength
     (Evaluation of coke quality in SCOPE21 pilot plant-1) Y.Kubota … 965

58   Effects of hot compacting coditions on briquette quality-2 K.Hanaoka … 966

59   The effects of hot briquetting of preheated coal on carry-over during charging M.Matsuura … 967

60   Carbon deposition inside coke oven at high coking rate K.Uebo … 968

61   Development of low NOx combustion technology in coke oven S.Yoshida … 969

62   Effect of fast coking on coke pushing force T.Arima … 970

63   Simulation model of coke pore structure with discrete element method T.Yamamoto … 971

64   Development of coke pore structure control technology K.Fukada … 972

65   In situ observation of coke gasification and behavior of ash H.Takamaru … 973

66   Evaluation of coke matrix strength S.Aizawa … 974

67   Micro-structural coke properties-binary blend cokes compared with a single coal coke N.Andriopoulos … 975

68   Drop height variation in coke drum index determinations N.Andriopoulos … 976

69   Critical pushing force for avoiding coke oven wall damage I.Shimoyama … 977

70   Success in management method of discharging pressure of coke M.Ando … 978

71   Development of cleaning equipment for charging-hole K.Suzuki … 979

72   Characterization of generation behavior of coke oven gas M.Nishifuji … 980

73   The surface structure correlations with the iron nucleation in the wustite reduction M.Bahgat … 981

74   The effect of grain boundary on the wustite reduction process M.Bahgat … 982

75   The surface structure correlation with the wustite surface rearrangement M.Bahgat … 983

76   Reactivity of wood char and gasification of polyethylene and polyethylene + hematite mixture M.Hasegawa … 984
    S.Itoyama… 164

77   Effect of surfactants on the dissociation rate of CO2 on the surface of FetO-based slag H.Matsuura … 985

78   (ISIJ Research Promotion Grant)
    CO dissociation rate on molten iron by 12C16O-13C18O exchange reaction Y.Sasaki … 986

79   (ISIJ Research Promotion Grant)
    Reduction rate of FeO in a molten hot-metal dephosphorization slag by CO gas D.Tanemura … 987

80   Effect of silicon and carbon on evaporation removal of copper from molten iron K.Taguchi … 988

81   Control of cathode spot behavior in vacuum arc cleaning H.Takahashi … 989

82   Characteristics of swirl motion of stratified two liquid layers in a cylindrical vessel D.Iguchi … 990

83   Effect of swirl motion of bubbling jet on dissolution rate of gas T.Kumagai … 991

84   Mixing time in spherical vessel agitated by gas injection Y.Kosaka … 992

85   Swirling motion of gas-liquid two phase jet and mixing time in a cylindrical vessel M.Shitara … 993

86   Efficient dispersion of low density particles by mechanical agitation T.Sukawa … 994

87   Effects of rotating cylinder and inclined plate on falling behavior of fine particles in liquid A.Hirayama … 995

88   Estimation of mixing performance in the bath with slag layer by water model experiment K.Miyamoto … 996

89   Cold model study on 3-dimensional flow characteristics in an arc plasma chamber K.Tsuchioka … 997

90   Observation of bubble behavior in a continuous casting mold based on the similarity law I.Furuhashi … 998

91   Development of methane-steam reformer by using latent heat storage N.Maruoka … 999

92   Fundamental analysis of waste heat recovery to steel scrap preheating in continuous casting process T.Wang … 1000

93   Suppression effect of nitrogen compounds on the de novo synthesis of dioxins S.Kuzuhara … 1001

94   Metal recovery from nickel electroplating sludge by thermite reaction T.Kashiwabara … 1002

95   Recovering elemental sulphur from SO2 emission with shredder dust Y.Nakazato … 1003

96   Three-dimensional analysis of transport phenomena in a high-temperature waste melting furnace Liang Xiaoping … 1004

97   Conditions on the carbon deposition from CO-CO2 mixture with iron catalyst T.Koyama … 1005

98   Gaseous coagulation characteristics of ZnO particles generated by oxidation of Zn vapor Hao Bai … 1006

99   Kinetics of chlorination-volatilization reaction of heavy metals from solid waste and dust Nan Wang … 1007

100  Recycling process of stainless dust by carbothermic reduction method T.Nakasuga … 1008

101  Example of large-scale works using steel slag hydrated matrix H.Matsunaga … 1009

102  Fundamental properties and stability for expansion of steel slag hydrated matrix
    (Development of steel slag hydrated matrix-1) F.Kogiku … 1010

103  Establishment of new estimation method of steel-making slag applicable for steel slag hydrated matrix
    (Development of steel slag hydrated matrix -2) N.Tsutsumi … 1011

104  Specification of applicable steel-making slag for steel slag hydrated matrix
    (Development of steel slag hydrated matrix-3) E.Kiso … 1012

105  Analysis of flow behavior in slag granulation process by rotary cup atomizer S.Namekata … 1013

106  Prevention effect of polyacrylate on solidification of blast furnace slag fine aggregate
    (A prevention technology for solidification of blast furnace slag fine aggregate-4) H.Mitsufuji … 1014

107  Subject on earthlike liquid fetilizer of slag
    (Development of mutual problems between iron steel making and agriculture fishery industories 11) K.Fujiwara … 1015

108  Effect of Droplet's size on surface tension measurements of liquid metals using the sessile drop method J.Lee … 1016

109  Viscosity of molten Fe-Cr-Ni ternary alloy as a basic system of stainless steel Y.Sato … 1017

110  Thermal conductivity of Na2O-CaO-SiO2 slags and its dependence on SiO2 concentration S.Ozawa … 1018

111  Effect of insulator on thermal conductivity measurement of liquid metals using a transient hot wire method
    and suppression of convection by static magnetic field T.Yoshimura … 1019

112  Change of composition and viscocity of slag produced at rapid heating of carbon bearing iron oxide pellets Y.Kimura … 1020

113  Evaluation of viscosity of molten slag in blast furnace operation M.Nakamoto … 1021

114  (ISIJ Research Promotion Grant)Effect of R2O,RO on the viscosity of CaO-SiO2-Al2O3 slags N.Hori … 1022

115  The measurement of deformation stress of the molten flux H.Urata … 1023

116  (ISIJ Research Promotion Grant)
    Spectral emissivity measurement of liquid silicon
    and its temperature dependence using electromagnetic levitator H.Kawamura … 1024

117  Effect of carbon content in the steel on the ratio of equiaxed zone H.Harada … 1025

118  Prediction of the cast structure of steel with the consideration of peritectic transformation K.Ohsasa … 1026

119  Effect of phosphorus on the austenite grain formation in hyper-peritectic carbon steels M.Kudoh … 1027

120  Prediction of as-cast γ grain size for near-net-shape CC N.Yoshida … 1028

121  Analysis of propagation path of hot tear H.Esaka … 1029

122  Precipitation of Cu and MnS at high temperature in Fe-10%Cu alloys K.Yamamoto … 1030

123  Precipitation of Sn and MnS at high temperature in Fe-C-Sn steels K.Yamamoto … 1031

124  The influence of several kinds of thermal hysteresis and metallurgical factors on the hot formability of steel grade for bar and wire rod K.Isobe … 1032

125  Hot cracking susceptibility during solidification of Fe-36Ni alloys Sun Koo Kim … 1033

126  Effect of Cu and Ni contents on hot ductility behavior of steel K.Donggyu … 1034

127  (ISIJ Research Promotion Grant)
    Measurement of three-dimensional raceway shape by X-ray computed tomography H.Nogami … 1035

128  Analyses on blast furnace raceway formation by micro wave reflection gunned through tuyere Y.Matsui … 1036

129  Effect of solid flow into raceway on raceway formation M.Sawayama … 1037

130  Enhancement of combustion efficiency of pulverized coal by improving surface property M.Sato … 1038

131  Production of high reactivity coke by blending Ca-rich coal
    (Improvement of blast furnace reaction efficiency by use of high reactivity coke -1) S.Nomura … 1039

132  Muroran No.2BF operation with Ca-rich high reactivity coke
    (Improvement of blast furnace reaction efficiency by use of high reactivity coke -2) H.Ayukawa … 1040

133  Numerical evaluation on blast furnace performance under operation with carbon composite agglomerates charging Mansheng Chu … 1041

134  Effect of high MgO slag on the operation at Kashima and Wakayama blast furnace S.Sugiyama … 1042

135  Relation between sinter reduction degree under CO-CO2-N2 gas and blast furnace operation M.Isobe … 1043

136  Model experiment of liquid flow with formation of solidified layer
    (Analysis of liquid flow in blast furnace hearth -5) A.Shinotake … 1044

137  Investigation of used carbon block for blast furnace and development
    of carbon block with high corrosion resistance M.Nitta … 1045

138  Thermodynamics for the SiO2-GeO2 melts T.Yoshikawa … 1046

139  Phase equilibria for the Ti2O3-MgO-SiO2 system T.Yoshikawa … 1047

140  Determination of the Ti2O3-CaO-Al2O3 phase diagram at steelmaking temperature T.Mizoguchi … 1048

141 (ISIJ Research Promotion Grant)
    The effect of Na2O on dephosphorization of molten steel by MgO saturated MgO-CaO-FeOt-Al2O3-SiO2 slag Guangqiang Li … 1049

142  The effect of B2O3 on dephosphorization of molten steel by MgO saturated FetO-CaO-SiO2-MgO slag T.Hamano … 1050

143  Activities of FeO and P2O5 in the CaO-FeO-P2O5 system M.Hasegawa … 1051
    A.V.Karasev… 229

144  Deoxidation and desulfurization equilibria of molten iron by calcium K.Taguchi … 1052

145  Sulfide capacity in the CaO-SiO2-Al2O3-MgO system M.Hasegawa … 1053

146  Desulfurization by nepheline- or nepheline synite-containing slags M.Hasegawa … 1054

147  Reaction between liquid Fe-Cr stainless steel and Al2O3 refractory Y.Mizukami … 1055

148  Phase equilibria in liquid Fe-Cu-C ternary alloy K.Matsui … 1056

149  Formation behavior of carbon in rapidly solidified Ni-C alloys S.Oishi … 1057

150  Thermodynamic reassessment of NaCl-KCl-PbCl2 ternary phase diagram A.Matsuzawa … 1058

151  Oxygen sensor for molten salts M.Hasegawa … 1059

152  Formation Gibbs energy of Na2RuO3 M.Hasegawa … 1060

153  Hot metal level sensor - suspected mechanism M.Hasegawa … 1061

154  Kinetic model of desulfurization reaction in mechanical-stirred ladle K.Yoshida … 1062

155  Inovation of hot metal pretreatment process at No.3 steel making shop in Yawata works T.Wada … 1063

156  Development of function of pretreatment at West Japan Works (Kurashiki) T.Tanaka … 1064

157  Effect of flux composition and temperature on dephosphorization rate
    of low-phosphorus hot metal N.Kikuchi … 1065

158  Improvement of hot metal desiliconization process S.Nabeshima … 1066

159  Producing of ultra low carbon steel under normal pressure condition T.Inomoto … 1067

160  Effect of slag composition on Mg content in Ni-base alloys containing high amount of aluminium A.Katsumata … 1068

161  Success in high productivity operation by new steelmaking shop at Wakayama works T.Ueki … 1069

162  36Ni-Fe ingot with high cleanliness by ESR process S.Ueda … 1070

163  Development of lime for steelmaking K.Wakabayashi … 1071

164  Properties of solid lime used for desulfurization and dephosphorization M.Ueda … 1072

165  Behavior of penetration and dissolution between solid CaO and molten slag M.Zeze … 1073

166  Behavior of dissolution of burnt lime into FeO containing slags H.Sunayama … 1074


Social Engineering of Iron and Steel Industry



167  Concept and development of the process
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-1) T.Furukawa … 1076

168  Characteristics of electric arc furnace exhaust gases
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-2) H.Sasamoto … 1077

169  Behavior of various components in EAF exhaust gases at high temperature coke bed filter
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-3) H.Sano … 1078

170  Thermodynamics simulation of behavior of components in EAF exhaust gases passing through the high temperature coke bed filter and the heavy metal condenser
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-4) H.Sano … 1079

171  Adsorption property of nanometer particles by packed beds of carbonaceous materials
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-5) N.Akae … 1080

172  Collective characteristics of simulated dust by coke moving bed filter at room temperature
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-6) R.Takahasi … 1081

173  Technology for separation and recovery of dust from EAF exhaust gases by bench scale coke bed filter
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-7) S.Isozaki … 1082

174  Development of dust collection model of the cokes bed filter
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-8) M.Furuuchi … 1083

175  Condensation behavior of zinc vapor on surface of solid media
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-9) M.Kobayashi … 1084

176  Effect of cooling rate on condensation and oxidation of zinc vapor
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-10) K.Matsuzaki … 1085

177  Mathematical models of heavy metal condenser applying falling particles as substrates
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-11) Y.Ohkubo … 1086

178  Characteristics of the condensation of zinc vapor and the separation of zinc metal
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-12) T.Furukawa … 1087

179  Construction and operation of small scale pilot plant

    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-13) H.Sasamoto … 1088

180  Analysis of small scale pilot plant operation results
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-14) H.Sasamoto … 1089

181  Development of the synthesis simulation model and the operation analysis
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-15) S.Oyama … 1090

182  Design of the actual equipment of the process
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-16) S.Oyama … 1091

183  Exergy analysis of JRCM process
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-17) N.Akae … 1092

184  Evaluation of the commercial scale plant of the process
    (Development of the direct separation and recovery process of iron and zinc metals from EAF exhaust gases-18) T.Furukawa … 1093

185  Analysis of effective utilization of iron scrap using pinch technology-1 I.Daigo … 1094

186  Analysis of effective utilization of iron scrap using pinch technology-2 I.Daigo … 1095

187  Environmental analysis of heat transfer and utilization systems in the recycling-based society H.Sumi … 1096

188  Survey and analysis of material links among industries utilizing ironmaking or steelmaking process Y.Kato … 1097

189  Domestic circulation of iron and steel scrap
    (Reuse of domestically generated scrap-1) S.Hayashi … 1098

190  Consumption of steel scrap and composition of steel products
    (Reuse of domestically generated scrap-2) S.Hayashi … 1099

191  Steel production and consumption of Japan in 2001 W.Tamaki … 1100

192  The condition of the industrial scrap classified by generating sections, and the view in 2010 W.Tamaki … 1101

193  Simulation of an alternate folding and forge welding of steel for the production of Japanese sword S.Amano … 1102


Current Advance in Materials and Process, Vol.16 ,No.5
Instrumentation, Control and System Engineering

194  Development of diagnosed apparatus for each coke oven chamber wall H.Yamashita … 1104

195  Development of interstand velocimeter for hot strip finisher Y.Isei … 1105

196  Monitoring in YAG laser spot welding M.Oikawa … 1106

197  History of application software and middleware development for process control computer systems
    and future software engineering vision S.Shimoi … 1107

198  Development and application of temperature pattern predictive control method at Kakogawa #1 sintering plant Y.Nishida … 1108

199  Development of the visualizing system of blast furnace process data
    (Report #4:Estimating and visualizing method of root of cohesive zone) M.Ito … 1109

200  Width control technology by hybrid control scheme in the hot strip mills S.Nishino … 1110


Production and Utilization Technology
201  Development of phosphorus free lubricant K.Hirata … 1184

202  Emulsion type oil with high performance for friction pick up in high speed cold rolling J.Sano … 1185

203  Effect of mother wire surface roughness and moisture absorption of lubricant on drawability S.Hashimoto … 1186

204  Numerical analysis of flow and thermal profiles of a planar jet impinging on a solid surface H.Fujimoto … 1187

205  Influence of extraneous material on shape of surface defect
    (Deformation analysis for surface defects in plate rolling III) A.Koyachi … 1188

206  Influence of rolling condition on deformation of surface defect parallel to rolling direction
    (Deformation analysis of surface defect in plate rolling IV) N.Yukawa … 1189

207  Evaluation for center void reduction by using hydrostatic stress parameter M.Nakasaki … 1190

208  Effects of Zr and Ca contents on machinability of SKD61 steels T.Inoue … 1191

209  Sulfide control for the improvement of chip breakability -[1] T.Kano … 1192

210  Formation of a built-up edge when cutting austenitic stainless steel Y.Nakashima … 1193

211  Improvement of wear resistance of hot strip mill backup roll M.Fukuya … 1194

212  Effect of added ceramic on the oxidation resistance of thermal spray coating on MCrAlY cermet S.Midorikawa … 1195

213  The improvement of bushing characteristics in bearing CGL Zn pot Yong-hee Kim … 1196

214  Prevention of seizure for titanium sheet forming S.Kataoka … 1197

215  Industrialization and basic characteristics in a high lubricative titanium sheet K.Takahashi … 1198

216  Improvement in press ability using a high lubricative titanium sheet T.Hayashi … 1199

217  Effect of solid lubricants on deep drawability of titanium Y.Ueno … 1200

218  Cold deep drawing of β-type titanium alloy sheets K.Mori … 1201

219  Wear of aluminum bronze dies in multi-stage deep drawing of pure titanium sheets Y.Harada … 1202

220  Formability of laser welded titanium pipes Y.Itami … 1203

221  Surface properties analysis of titanium sheet produced by vacuum hot rolling A.Segawa … 1204

222  SEM analysis of bonding interface in titanium clad steel produced by vacuum hot rolling A.Segawa … 1205

223  Development of a new type titanium casting technology/LEVICAST process N.Demukai … 1206

224  High temperature deformation behavior of Ti-4.5Al-4Cr-0.5Fe-0.2C K.Ono … 1207

225  Hot extrusion forging technology of titanium engine valve M.Yoshizaka … 1208

226  Features of high-speed large-reduction press machine
    (Grain refinement by large reduction forging technology-1) Y.Sodani … 1209

227  FE analysis on the deformation characteristics of high-speed large-reduction forging
    (Grain refinement by large reduction forging technology-2) M.Miyake … 1210

228  Experimental equipment for super short interval multi-pass rolling and cooling
    (Development of super short interval multi-pass rolling technology for ultra-fine-grained steel -1) M.Eto … 1211

229  Fundamental investigation into grain refining effect and load characteristics of super short interval multi-pass rolling
    (Development of super short interval multi-pass rolling technology for ultra-fine-grained steel -2) S.Fukushima … 1212

230  Experimental equipment of complex rolling/bending multiple accumulator
    (Grain refining investigation by complex rolling / bending multiple accumulation process-1) T.Hiruta … 1213

231  Effect of bending condition on grain refinement
    (Grain refining investigation by complex rolling/bending multiple accumulation process-2) Y.Matsubara … 1214

232  Micro-scale modeling for the prediction of microstructure evolution after severe plastic deformation
    (Part 1:Effective grain boundary area of formed metal) J.Liu … 1215

233  Semi-solid casting-pressurizing process of cast iron M.Takita … 1216

234  Large straining characteristics in torsion extrusion S.Mizunuma … 1217

235  Development of super cermet rolls T.Hattori … 1218

236  Evaluation of base oil for hot rolling by SRV test machine K.Aoki … 1219

237  Effects of additive effects of colza base oil on coefficient of friction in hot rolling K.Aoki … 1220

238  Development of grease-base lubricant for ecological conscious ultra fine grained steel strips
    (Study of solid lubricant having excellent anti-seizure and ecological conscious property) H.Ihara … 1221

239  Characteristics of liquid colloidal lubricants with solid powder lubricant and inorganic compound J.Ikeda … 1222

240  Effects of main factors on warp in roughing mill process K.W.Kim … 1223

241  Numerical simulation of crossbow after plate cooling T.Akashi … 1224

242  Auto load distribution control of hot strip tandem mill H.Inami … 1225

243  Stabilization of tail crash control in hot strip finishing mills A.Ishii … 1226

244  Improvement of hot strip profile for cold-rolled steels by using the method of six sigma K.Y.Sihn … 1227

245  Development of quarter buckles control technology in 20-high sendzimir mills T.Kubo … 1228

246  Effect of roll surface roughness on the strip surface A.Hagiwara … 1229

247  (ISIJ Research Promotion Grant)
    Effect of oxygen in shielding gas on TIG weld penetration depth H.Fujii … 1230

248  Hardness and microstructure of heat-affected zone on welding of ultra-fine grained weathering steel S.Meguro … 1231

249  TExperimental and theoretical investigation on tilting under bar and rod rolling Y.Katayama … 1232

250  Development of diameter control system for three-roll sizing mill M.Kishi … 1233

251  Development of steel tubes with accurate dimension using 4 roll type stretch reducing mill T.Nagahama … 1234

252  The evalution of new deveroped piercing roll with high carbon and low hardness at the piercing stand in pipe manufacturing line T.Kanayama … 1235

253  Outline of finishing process of medium size seamless pipe mill
    (Process of miedium size seamless pipe mill at Wakayama works-5) T.Takano … 1236

254  Improvement of quality assurance system with seamless tubular for HRSG K.Nakashima … 1237

255  Phenomena caused by diffusion in sintered materials K.Hayashi … 1238

256  Sintering simulation of metallic hollow spheres K.Shinagawa … 1239

257  Micro-macro coupled simulation of sintering using Monte Carlo and finite element methods K.Mori … 1240

258  Analysis of tensile and fatigue fracture behavior for ferrous sintered materials H.Miura … 1241

259  IMicrostructure and mechanical properties of aluminum alloy fabricated by consolidating chips by severe plastic deformation H.Toda … 1242

260  Effect of rolling reduction rate on tensile properties of Fe-Cu alloy consolidated by rolling H.Kakisawa … 1243

261  Surface modification of titanium alloys with hard powders by shot peening Y.Harada … 1244

262  In situ synthesis of FeAl base ODS by MA-VHP process M.Hashii … 1245

263  Production of ultra fine powders by hybrid atomization K.Minagawa … 1246

264  Fabrication of Ti-Ni-Cu shape memory alloy by pulse-current pressure sintering and its thermo-mechanical characteristics H.Kyogoku … 1247

265  Mechanical properties and machinability of pre-alloyed steel powder for sinter hardening process H.Suzuki … 1248


Current Advance in Materials and Process, Vol.16 ,No.3
Microstructure and Properties of Materials

266  Effect of Nb, P on 4K tensile properties of aged 316LN stainless steels K.Ishio … 1403

267  Behavior of surface nitriding and mechanical properties of 12mass%Cr stainless steels S.Nakamura … 1404

268  Effect of heat treatment temperature and carbide area fraction on wear resistance of austenitic stainless steel S.Tsutsumi … 1405

269  Effects of structure, hardness, and precipitates on abrasive wear resistance of stainless steels T.Suetsugu … 1406

270  Effect of heating condition on high-temperature strength and toughness for Cu containing ferritic stainless steel T.Tomita … 1407

271  Effect of heat treatment at(α+γ)phase region on toughness of 17mass%Cr stainless steel Y.Hideshima … 1408

272  Magnetic properties and microstructure of general 13%Cr Steel for cold forging K.Takano … 1409

273  Outgassing measurements of Hi-Mn stainless steel S.Teraoka … 1410

274  Development of high strength hot rolled sheet steel by thin slab casting and hot direct rolling-1 S.Hashimoto … 1411

275  Development of high strength hot rolled sheet steel by thin slab casting and hot direct rolling-2 S.Hashimoto … 1412

276  Effect of cooling conditions and coiling temperature on coil break of B-bearing steel sheets J.Haji … 1413

277  FEM analysis on a study of blister appearance mechanism T.Uchino … 1414

278  Microstructure and tensile properties of aluminum-alloyed TRIP-aided sheet steels with annealed martensite matrix B.Yu … 1415

279  The effects of Hot-rolled microstructures and cold rolling ratio on ductility of low alloy TRIP-aided cold rolled steel sheets T.Kashima … 1416

280  Effect of welding condition on the characteristics of CO2 laser welded 800MPa class TPIP steel Chung Yun Kang … 1417

281  Effect of Cr and Mo on mechanical properties and phosphatability T.Mega … 1418

282  Carbide solution behavior in soaking slab of Hot-rolled steel sheet strengthened by nanometer-sized precipitates A.Kobayashi … 1419

283  Coasening behavior of nanometer-sized precipitates in ferrite single phase Hot-rolled high strength steel sheets Y.Funakawa … 1420

284  Effect of microstructure on stretch-flange formability of 980MPa grade Cold-rolled ultra high strength steels K.Hasegawa … 1421

285  Effect of chemical compositions and microstructure on warm temperature strength
    in precipitation hardening type hot rolled steel sheets S.Hironaka … 1422

286  Monte Carlo simulation for recrystallization in IF steels, combined with OIM microstructure K.Okuda … 1423

287  Effect of temper rolling on formability and baking hardenability in 340Mpa grade baking hardenable steels for automobile outer panel Heung Seok Ko … 1424

288  Development of 390-440MPa grade low yield ratio type new Bake-hardenable steel sheet J.Haga … 1425

289  Dent resistance performance of sheet hydroforming parts Y.Tokita … 1426

290  Application of work hardening type cold-rolled steel sheets of 980MPa grade to weld tubes T.Matsumoto … 1427

291  Effect of precipitation behavior of MnS and AlN on grain growth in 3%Si steels T.Takamiya … 1428

292  Effect of initial texture on magnetic induction of 3mass% Si steel thin sheet after rerolling and annealing T.Koga … 1429

293  Magnetic properties of grain oriented electrical steel by anisotropic tension coating H.Yamaguchi … 1430

294  Magnetostriction of fine-grained doubly oriented silicon steel sheets T.Tomida … 1431

295  Magnetic properties of grain-oriented electrical steel with good punchability suitable for EI core Y.Hayakawa … 1432
    T.Ikeda… 612

296  Effect of primary recrystallized grain structure on secondary recrystallization in grain oriented silicon steel Y.Ushigami … 1433

297  Influence of Cr addition on magnetic properties in Non-oriented electrical steel sheets T.Oomura … 1434

298  Effect of alloying elements on the magnetic properties of Sn-Ni-Cu-added Non-oriented electrical steels Byung-Keun Bae … 1435

299  Effects of quenching temperatures and chemical compositions on saturation magnetization of Fe-Cr-Mn-C and Fe-Cr-Ni-Mn-C alloys S.Yokoyama … 1436

300  Effect of alloying elements on carburization of case-hardening steels Y.Saeki … 1437

301  Austenite grain size characteristic of Ti-added carburizing steel T.Tanaka … 1438

302  A behavior of disappearance and creation of pro-eutectoid cementite during vacuum carburizing S.Kozawa … 1439

303  Development of unleaded free machining carburizing steel with Ca and S
    (Resistance to carbide tool wear and fatigue crack propagation property of calcium treated resulfurized steel) T.Fujimatsu … 1440

304  Thermo-mechanical forging in α+γ region of high strength low alloy TRIP-aided steels
    (Effects of carbon content on microstructure and tensile properties) N.Inoue … 1441

305  Effect of MnS morphology on ovalization after fracture splitting K.Shiihashi … 1442

306  Effect of Ca,Mg addition on the wear of carbide tool N.Matsui … 1443

307  Properties of the rails made at Yawata Works in the early 20th century H.Masumoto … 1444

308  Influence of microstructure on rolling contact wear in high carbon steels M.Ueda … 1445

309  Change of mechanical properties during low temperature aging in pearlitic steel wires strengthened by drawing K.Nakamura … 1446

310  The effect of grain refining treatment on rolling contact fatigue life
    (The effect of grain refining treatment on bearing performance-1) C.Ohki … 1447

311  The effect of grain refining treatment on RCF life under debris-contaminated condition,strength and dimensional stability of rolling bearing
     (The effect of grain refining treatment on bearing performance-2) C.Ohki … 1448

312  Fabrication of a hot-work tool steel with ultra fine grain structure K.Kataoka … 1449

313  Effect of alloying elements on mechanical properties of hot working die steel S.Tanaka … 1450

314  Statistical analysis on fatigue lives of cold work tool steel and effect of retained austenite D.Yokoi … 1451

315  Effect of carbon content on micro structure and properties of 13Cr-Co overlay weld metals Y.Satoh … 1452

316  Elastic strains of cementite plates in pearlite measured by a neutron diffraction time-of-flight method
     (Application of neutron scattering to steel research: part 1) A.Kanie … 1453
317  Residual stress measurement by neutron diffraction for quenched steels
    (Application of neutron scattering to steel research: part 2) H.Tokuda … 1454

318  Development of in-situ neutron diffraction measurements during hot deformation

    (Application of neutron scattering to steel research: part 3) T.Suzuki … 1455

319  High temperature creep of Ti-48Al with Duplex microstructure Y.Tanaka … 1456

320  Oxidation behavior of NbC/TiC on inconel 718 surface Jae-Keun Hong … 1457

321  Effect of coating materials on cracking behaviors of gas turbine buckets D.Saito … 1458

322  Microstructure and mechanical properties of Ni-base superalloy S.Imano … 1459

323  Low-stress creep of Ni-20mass%Cr single crystals with [001] orientation T.Tokumoto … 1460

324  High temperature microstructure stability of low Nb and high Al Ni-Fe base superalloy S.Imano … 1461

325  Creep of Ni-20mass%Cr alloy single crystals with orientations between [001], [011] and [111] S.Kato … 1462

326  Dislocation substructure at γ/γ' interface of single crystal Ni-based superalloy,CMSX-4,crept at 1273K-100MPa F.Tanaka … 1463

327  Change in morphology of γ' phase single crystal Ni-based superalloy, CMSX-4, pre-crept at 1273K-250MPa with simple aging H.Otaki … 1464

328  Strain aging properties and microstructure of Co-Ni-Cr-Mo alloys S.Ueta … 1465

329  Analysis of creep deformation process of heat resistant steels using positron annihilation lifetime M.Igarashi … 1466

330  Creep modelling and lifetime prediction of 9%Cr martensitic steels with physically-based CDM
    (Creep modelling of martensitic heat resistant steels-5) H.Semba … 1467
331  Boiler residual life assessment technique based on small punch creep test T.Kobayasi … 1468

332  Evaluation of toughness and creep properties of Cr-Mo-V casting steel using a small punch specimen T.Sugimoto … 1469

333  Influence of tempering on creep rupture ductility of quenched and tempered 2.25Cr-1Mo steel H.Kushima … 1470

334  Creep strength analysis of 2.25Cr-1Mo steel and NIMS creep data sheet project O.Kanemaru … 1471

335  Changes in type R thermocouples during long-term creep exposure H.Miyazaki … 1472

336  TEffect of strain on ultrafine ferrite grains formed by single-pass large strain-high Z deformation N.Koseki … 1473

337  Nanocrystallization on surface of steels by shot peening Y.Todaka … 1474

338  Shape change and dissolution of cementite in steels by plastic deformation M.Umemoto … 1475

339  Microstructures and mechanical properties of fine-grained hot strip products Kyung-keun Um … 1476

340  Precipitation and age hardening behavior in copper bearing ultra-fined grained steels M.Matsuki … 1477

341  Characterization of fine Cu precipitates by using positron annihilation H.Yasuhara … 1478

342  Dynamic recrystallization of Ti-6Al-4V alloy H.Abe … 1479

343  The effect of Al addition on phase constitution and heat treatment behavior in Ti-7mass%Cr-Al alloys M.Ikeda … 1480

344  Prior B2 grain size refinement and the effect on the mechanical properties of O-base Ti-22Al-27Nb alloy S.Emura … 1481

345  Refinement of β grain size due to TiB or Y2O3 precipitates in PM titanium alloy N.Yamamoto … 1482

346  Relationship between lattice parameter and yield strength in orthorhombic artensite of Ti alloys K.Ono … 1483

347  Application of titanium sheets for snow sliding panels T.Mori … 1484

348  Direct reduction of TiO2 using molten salt electrolysis in CaCl2 bath M.Yoshida … 1485

349  Reduction and deoxidation of TiO2 in molten salt mixtures N.Asahara … 1486

350  Evaluation of hydrogen absorption property of Ti-1.5%Al alloy S.Sakashita … 1487

351  Effect of microstructure on fretting fatigue crack propagation characteristics of high workable titanium alloy J.Takeda … 1488

352  Plasma arc welding of commercially pure titanium and Ti-6Al-4V ELI heavy plates H.Fujii … 1489

353  Effect of Ti on the weld zone property of ferritic stainless steels S.Okada … 1490

354  Effect of Ni,P content on weld hot cracking susceptibility of fully austenitic Fe-Cr-Ni alloy T.Nishibata … 1491

355  Mechanical properties of friction stir welding joints of austenitic stainless steels in liquid hydrogen
    (Study on low temperature materials used in WE-NET-22) H.Kimura … 1492
356  Crevice corrosion resistance of Type 444 SS and its application to panel-type water tank I.Muto … 1493

357  Corrosion resistance of stainless-steel on using automotive fuel system parts N.Ono … 1494

358  Effects of minor elements on etching properties of an Fe-36%Ni alloy T.Ono … 1495

359  Evaluation of surface roughness of electrogalvanized steel sheets E.Hamada … 1496

360  Newly developed lead-free and chromium-free electrogalvanized steel sheets with excellent solderability T.Hayashida … 1497

361  Formability of inorganic chromium-free coated electrogalvanized steel sheet A.Yasui … 1498

362  Electrolytic chromate-free treatment M.Komai … 1499

363  Effects of emissivity on the heat releasing capability of thin steel sheets T.Watase … 1500

364  Development of 500oC-resistant prepainted steel sheet S.Yonezawa … 1501

365  Effect of additive on surface appearance and properties of film of pre-painted steel Y.Kito … 1502

366  Improvement of adhesion of polypropylene laminated steel sheets T.Suzuki … 1503

367  The influence of Si,Mn,Ni and Cu on the galvanizability of steels Y.Takada … 1504

368  Effect of substrate annealing temperature on galvanized reactions M.Arai … 1505

369  Diffusion path during alloying reaction between aluminized layer and steel J.Maki … 1506

370  The corrosion protection behavior of hot dip galvanized Zn-Mg steel sheet under atomospheric environment K.Nishimura … 1507

371  Development of the Si and Mn bearing high-tensile galvannealed sheet steel with excellent anti-powdering property Y.Suzuki … 1508

372  Effect of surface composition on surface friction of galvannealed steel sheet
    (Press formability of galvannealed steel sheet-3) S.Taira … 1509

373  Effect of surface oxide on adhesion of galvannealed steel sheets M.Tada … 1510

374  Estimation of air born salinity in seashore area T.Shinohara … 1511

375  Atmospheric corrosion monitoring of steel using QCM K.Noda … 1512

376  pH distribution and localized corrosion site of stainless steel K.Noda … 1513

377  Calculation of the dr depletion region in a dual-phase stainless steel S.Amano … 1514

378  Application of conductive polymer materials to separator for fuel cell H.Uejima … 1515

379  (Program for Stategic Research projects)
    Thermodynamic database for Fe-S-base multi-component alloy K.Oikawa … 1516

380  (Program for Stategic Research projects)
    Thermodynamic analysis of interaction effect between chemical and magnetic ordering in Fe-base alloys I.Ohnuma … 1517

381  (Program for Stategic Research projects)

    Development of thermodynamic database for micro-alloyed steels K.Ishida … 1518

382  (Program for Stategic Research projects)
    Incorporation of ab-initio method into phase diagram calculation of micro-alloyed steels
    (Estimation of the formation energies for some compounds) H.Ohtani … 1519
383  (Program for Stategic Research projects)
    Contribution of dislocation strengthening to yield strength in ultra-low carbon martensitic steels K.Nakashima … 1520

384  Effect of interaction between substitutional atoms on solid solution strengthening in ferritic iron H.Sueyoshi … 1521

385  Precipitation in a plasma nitrided Fe-Ti alloy G.Miyamoto … 1522

386  Microstructure and mechanical properties of Cu bearing 9%Ni steels N.Nakada … 1523

387  Effects of Nb on 0.2% yield strength of Fe-36%Ni alloys T.Nishi … 1524

388  Effect of Al,Cu on microstructure of high hardness graphitized steel
    (Effect of graphite distribution on friction properties) K.Kubota … 1525

389  Substituting possibility of thermo-mechanical treatment process for production of superplastic SUS304 M.Katoh … 1526

391  Effect of ultrasonic output power on refining of crystal structures of ingots and its experimental simulation Jon.Wen.Li … 1528

392  Martensitic transformation behaviour and its dependence on grain boundary character in Fe-Ni bicrystals Y.Umakoshi … 1529

393  Influence of sulfur, nitrogen and manganese on intra-granular ferrite formation in titanium oxide steels A.Kojima … 1530

394  Influence of manganese sulfur and nitrogen on intra-granular bainite formation in high strength steel welds Y.Shinohara … 1531

395  Role of manganese depletion in intra-granular transformation in titanium oxide steels M.Sugiyama … 1532

396  Development of FH355 steel plates for low-temperature use LNG carrier
    (Improvement of HAZ toughness under high heat input welding-1) Y.Okazaki … 1533

397  Development of EH390 steel plates for giant container ships
    (Improvement of HAZ toughness under high heat input welding-2) H.Kawano … 1534

398  Effect of soluble Nitrogen on tensile strength of low alloy steel and effect of alloy elements on its strengthening Y.Kagawa … 1535

399  Structure and strength of mechanically alloyed Fe-Cr-Mo-N powders and their consolidated materials Y.Hori … 1536

400  Evaluation of strain in polycrystalline brittle materials by using EBSP K.Ohkawara … 1537

401  Fracture toughness test by round bar specimen with circular notch T.Murakami … 1538

402  Evaluation of hydrogen embrittlement susceptibility for high strength steels with local approach by considering hydrogen distribution
     (Examination for estimation of delayed fracture properties-11) S.Takagi … 1539

403  Effect of tempering on delayed fracture property of secondary hardening steel M.Kubota … 1540

404  Effect of pre-stress load on delayed fracture of steels containing V or Ti by SSRT W.Urushihara … 1541

405  Effect of corrosion pit and hydrogen on the fatigue strength of high strength spring steel M.Oka … 1542

406  Evaluation of susceptibility to environmental degradation of suspension spring steel by CCT-SSRT T.Tsubota … 1543

407  Change in hydrogen trapping sites of high-strength steel under elastic and plastic stress S.Nagoshi … 1544

408  Hydrogen absorption into high strength bolt under atmospheric exposure T.Omura … 1545

409  Environmental factors affecting hydrogen absorption into steels T.Omura … 1546

410  Effect of plastic strain on stress corrosion cracking susceptibility in high temperature water of austenitic stainless steel Y.Katayama … 1547

411  Development of high fatigue strength stainless steel for spring after hydrogen absorption Y.Fujino … 1548

412  Relationship between creep properties and microstructures of carbon-free martensitic alloys without Co for heat resistant application at 973K S.Muneki … 1549

413  Relationship between creep properties and microstructures of carbon-free martensitic alloys for heat resistant application at 1073K S.Muneki … 1550

414  Change of creep deformation behavior in low-carbon 9Cr steel with increasing boron concentration M.Taneike … 1551

415  Effect of nitrogen content on creep strength in extremely low carbon 9Cr steel K.Sawada … 1552

416  Effect of Mo and W on steam oxidation behaviour of 9Cr ferritic steels H.Kutsumi … 1553

417  Effect of nitrogen on creep properties of high-B 9Cr steel H.Okada … 1554

418  Behavior of boron in high Cr ferritic heat resistant steel at high temperature heat treatment K.Sakuraya … 1555

419  Stress relaxation behavior of Boron added 9Cr ferritic creep resistant steel T.Ohba … 1556

420  Effect of TaN particles on creep behavior of ferritic steel M.Tamura … 1557

421  Effect of Nd on creep ductility of the martensitic heat resistant steels M.Yoshizawa … 1558

422  Effect of heat treatment on creep rupture properties of 9Cr-W-Mo steel T.Takahashi … 1559

423  Change in the particulate microstructure during isothermal aging in high Cr ferritic steel Y.Kadoya … 1560

424  Microstructure of mod.9Cr-1Mo steel used in a power plant T.Ito … 1561

425  Influence of stress on recovery of mod.9Cr-1Mo steel during creep exposure K.Kimura … 1562

426  Dislocation substructure and variation of interparticle spacing of modified 9Cr-1Mo steel in creep H.Hayakawa … 1563

427  Nano-meso-macro hardness measurement of mod. 9Cr-1Mo steel
    (Multi-scale evaluation of microstructure by nano-meso-macro hardness in high Cr ferritic creep resistant steel-1) K.Miyahara … 1564

428  Nano-meso-macro hardness change during creep in mod.9Cr-1Mo steel
    (Multi-scale evaluation of microstructure by nano-meso-macro hardness in high Cr ferritic creep resistant steel-2) K.Sawada … 1565

429  Mechanical properties and microstructures of type 10Cr heat resistant steels T.Kaneko … 1566

430  Microstructures of ferritic heat-resisting steels M.Kimura … 1567

431  Ostwald ripening behavior of Cu particles in high chromium martensitic steels Y.Futamura … 1568

432  Creep damage behavior of 2.25Cr-1Mo steel weldments N.Komai … 1569

433  Creep strength and microstructures of simulated HAZ specimens of high Cr ferritic steel M.Matsui … 1570

434  Creep fracture behavior of 9Cr steel welded joint Y.Hirakawa … 1571

435  Creep rupture strength and fracture morphology in welded joint of high Cr ferritic steel S.Date … 1572

436  HAZ microstructures of high-B 9Cr heat resistant steel weldments
    (Creep properties and microstructures of high-B 9Cr heat resistant steel weldments-2) M.Kondo … 1573

437  Improving the type IV cracking resistance of 9Cr ferritic steels by boron addition
    (Creep properties and microstructures of high-B 9Cr heat resistant steel weldments-1) S.K.Albert … 1574
438  Cavity formation mechanism in HAZ of a welded mod.9Cr-1Mo steel Jae-Seung, Lee … 1575

439  Effects of Ni contents on microstructure of solid solution treated 15Cr ferritic steels with ageing Y.Toda … 1576

440  An effect of heat treatment in the magnetic field on the creep properties and microstructures of the high Cr ferritic heat resistant steel H.Okubo … 1577

441  Effect of boron on creep strength of low carbon austenitic heat resistant steel T.Ishitsuka … 1578

442  Effect of B and N on creep rupture properties of austenitic stainless steels J.Kyono … 1579

443  High temperature long term properties and chemical compositions of type 316 stainless steels S.Obara … 1580

444  Precipitation behavior during long-term creep of SUS321 steel H.Tanaka … 1581

445  Simulation of ferrite transformation in 490MPa grade weld metals S.Nanba … 1582

446  Calculation of α/γ inerfatial energy at irralational orientation T.Nagano … 1583

447  Modelling of bainite transformation with the repeated nucleation of sub-units H.Matsuda … 1584

448  Simulation of Cu precipitation in Fe-Cu alloys during continuous cooling M.Enomoto … 1585

449  The investigation of the transformation model of acicular ferrite in 490MPa grade weld metals T.Murakami … 1586

450  Fatigue crack growth property of ferrite/martensite dual-phase steel K.Nakashima … 1587

451  Very low cyclic fatigue properties of X80 grade high strength line pipe T.Nose … 1588

452  Internal fracture in high-cycle fatigue at high-temperatures K.Kobayashi … 1589

453  Gigacycle fatigue properties for modified-ausformed Si-Mn steels Y.Furuya … 1590

454  Atomic force microscopy of local plastic deformation for modified-ausformed tempered martensite in a medium-carbon steel M.Hayakawa … 1591

455  Giga-cycle fatigue properties of modified-ausformed steels with V-addition H.Hirukawa … 1592

456  Effect of frequency on surface-fracture fatigue properties for Ti-6Al-4V alloy E.Takeuchi … 1593


Process Evaluation and Material Characterization

457  Structural analysis of montmorillonite by solid-state NMR K.Kanehashi … 1616

458  Investigation of hydrated montmorillonite by solid-state NMR T.Ohkubo … 1617

459  Structural analysis of industrial materials using 13C solid state NMR with editing techniques K.Saito … 1618

460  Development of trace gas analysis in high temperature furnace based on jet-REMPI instrument-II S.Hayashi … 1619

461  Optical emission characteristics of surrounding and impurity gases of low-pressure laser-induced plasma H.Matsuta … 1620

462  Determination of tin in steels by high power nitrogen microwave induced plasma atomic emission spectrometry with hydride generation technique A.Matsumoto … 1621

463  Determination of trace elements in iron and steel
    by neutron activation analysis with multiple gamma-ray detection (2) A.Kimura … 1622

464  X-ray structure analysis of high carbon steel wires with synchrotron radiation A.Taniyama … 1623

465  The measurement of particle size distribution of inclusion by electric sensing zone method N.Koga … 1624