Program of the 148th ISIJ Meeting (September 28-30, 2004)
General Presentation Only

High Temperature Processes



1    Stabilization of surface motion of finite depth molten metal by imposing alternating magnetic field   Y.Yamamoto   … 744

2    Holding of molten metal leakage using a high magnetic field   Y.Hirono   … 745

3    Behavior of simulated inclusions under the imposition of electromagnetic vibration forces   Y.Murakata   … 746

4    Improvements in efficiency of the cold crucible furnace   K.Yamamoto … 747

5    Free-form microchanneling by a new powder-metallurgical process   M.Takatoo … 748

6    Instability and effect of crushing energy on the milling of iron oxide-carbon mixture   R.Suzuki … 749

7    alpha.gif(64 byte)-iron nucleation and growth on the surface of Fe3O4 crystal   S.Hijino … 750

8    Effect of niobium on the solidification of iron and iron-carbon alloy   M.Tezuka … 751

9    Formation mechanism of large carbide in high carbon bearing steel and prevention measures against large carbide formation   K.Isobe … 752

10   Relationship between composition and crystallization temperature of inclusions in SUS304 stainless steel   Y.Ehara … 753

11   Surface quality improvement of stainless steel at billet caster   Y.Oota … 754

12   Improvement of surface deffects in stainless steel bottom slabs   M.Watanabe … 755

13   Effect of steel grade on oxidation rate of molten steel in still state   K.Sasai … 756

14   Operation and quality improvement of bloom CC with plasma tundish heater   S.Yamahira … 757

15   Improvement of quality of steel for bearing steel at West Japan Works (Kurashiki)   T.Takeda … 758

16   The improvement of surface cracks on leaded free-cutting steel bloom   Y.Ohba … 759

17   (ISIJ Resarch Promotion Grant)
     Effect of alloying elements on the dissociation rate of nitrogen at the surface of molten iron   H.Nakazato … 760

18   Nitrogen removal from molten iron to gas phase through CaO-Al2O3 melt   T.Satou … 761

19   Development and evaluation of electromagnetically driven wideband ultrasonic oscillator   M.Ohara … 762

20   Effect of ultrasonic wave on degradation of organic chemical substance   Y.Yoshida … 763

21   Gas injection into mercury from ultrasound vibrating orifice   K.Okumura … 764

22   Effect of blade on prevention of suction vortex   T.Masuno … 765

23   Water model experiments on attachment and removal of particles from liquid by bubbles   N.Iida … 766

24   Effects of immersion cylinder on the dispersion of low density particles by mechanical agitation   T.Sukawa … 767

25   Mixing time in tapered vessel agitated by gas injection   Y.Kosaka   … 768

26   Mixing time in a cylindrical bath agitated by off-centered swirling liquid jet   D.Iguchi … 769

27   Swirl motion of bubbling jet in inclined cylindrical bath   T.Sato … 770

28   Analysis of flow in and around a droplet on its rapture stage at a liquid-liquid interface   T.Kagawa … 771

29   Swirl motion of stratified two liquid layers induced by top lance gas injection   T.Kumagai … 772

30   Process parameters for inclined-vortex formation by mechanical offset agitation   T.Ohmi … 773

31   (ISIJ Resarch Promotion Grant)
     Normal spectral emissivity of undercooled liquid silicon and the mechanism of thermal radiation   H.Kawamura   … 774

32   Accurate measurement of the sound velocity and ultrasonic absorption of liquid tin   H.Yamada … 775

33   Viscosity of molten Fe-Si binary alloy   Y.Sato … 776

34   Electronic polarisability of oxygen and charge transfer band edge for slags containing iron oxide in terms of electron donor power of oxygen   S.H. Firoz … 777

35   Effect of Al2O3 on viscosity in multi-component molten slag   M.Nakamoto … 778

36   Advantage of multinuclear solid-state NMR to structural analysis of slag   K.Kanehashi … 779

37   Grain growth of beta.gif(67 byte)-silicon nitride dispersed in Re-Mg-Si-O-N melts   N.Saito … 780

38   Heat transfer across mold flux from perspective of its degree of crystallinty   S.Ozawa … 781

39   Thermal conductivity of the CaO-Al2O3-SiO2 system   Y.Kang … 782

40   Thermal properties measurement of CaO-SiO2 system fluxes with square wave pulse heating method   S.Kawachi … 783

41   Prevention of resulfurization in the desulfurization process of molten iron with Mg vapor injection   Jian Yang … 784

42   Desulfurization of hot metal by solid CaO using capillary refining   Y.Ogiso … 785

43   Effect of aluminum addition on hot metal desulfurization   K.Naito … 786

44   Effect of top blowing oxygen on the dephosphorization of hot metal by mechanical stirring method    M.Aizawa … 787

45   Kinetics of iron oxide formation under the condition of oxygen top blowing on hot metal-2   A.Matsui … 788

46   Behavior of spitting during blowing in BOF   T.Ueyama … 789

47   BOF operation of low hot metal ratio based on dephosphorized hot metal   A.Tsunoda … 790

48   Reduction of tapping temperature by the heat insulating cover in ladle   H.Shirosawa … 791

49   Effect of grain size distribution of MgO clinker on oxidation rate of MgO-C brick   H.Sunayama … 792

50   Improvement of decarburization characteristics of No.2RH in Kimitsu Works   K.Tanabe … 793

51   Nitrogen control for high-Cr steel ingot on Vacuum casting   K.Morinaka … 794

52   Effect of addition of REM elements on inclusions in Si killed stainless steel   G.Okuyama … 795

53   Estimation of the reduction of CaO-containing wustite with CO-CO2 gas mixture   T.Inami … 796

54   Mass transfer in metallic iron layer at rapid reduction of iron oxide by CH4 gas    K.Maeda … 797

55   Kinetic analysis of iron-oxide reduction by vapor deposited carbon   I.Seki … 798

56   Relative contribution of the direct and indirect reactions during heating carbon composite iron ore pellets   S.Yokomoto … 799

57   Reaction behavior of coal composite iron ore hot briquettes at elevated temperatures   S.Hayashi … 800

58   Effect of channeling factor on liquid hold-ups in packed bed   K.Shinmyou … 801

59   Specificity of granulation with dispersant (Development of the intensified granulation technique in iron ore sintering-4)   K.Kono … 802

60   The application of dispersants under the burnt lime existence condition
     (Development of the intensified granulation technique in iron ore sintering-5)   S.Miura … 803

61   Increase in sintering productivity with dispersant
     (Development of the intensified granulation technique in iron ore sintering-6)   T.Okada … 804

62   Water condensation in sinter bed under using a large amount of limonitic ores   T.Otomo … 805

63   Influence of limestone and coke breeze coating time on the quasi-particle structure   N.Oyama … 806

64   Effect of the number-of-rotations distribution of roller on sinter feed segregation
     (Development of new feeding equipment for controlling charge segregation of sinter feed-2)   T.Matsumura … 807

65   Dissolution rate of Fe2O3 into calcium ferrite melt   Y.Yamano … 808

66   Development of a 3 dimensional mathematical simulation model of sintering process   H.Yamaoka … 809

67   Suitable production condition of pre-reduced agglomerates
     (Development of process for pre-reduced agglomerates production-1)   S.Machida … 810

68   Mineralogy and low-temperature reduction behavior of hematite compacts sintered under plant conditions
     (Influence of microstructure on the reduction behavior of hematite-3)   K.Higuchi … 811

69   Effect of dolomite sinter under high temperature sinter condition on soften properties   M.Matsumura … 812

70   (Invited lecture)
     A gasification process of carbonaceous residues by steam plasm   H.Nishikawa … 813

71   (Invited lecture)
     Chemical and thermal non-equilibrium model of high-power Ar-N2 pulse-modulated induction thermal plasmas   Y.Tanaka … 814

72   (Invited lecture)
     Investigation of reaction mechanism of ion exchange resin treated by reactive thermal plasmas   A.Nezu … 815

73   (Invited lecture)
     Development of high thermal efficiency plasma reactor   S.Sakiyama … 816

74   (Invited lecture)
     Characteristics of hollow cathode arc as a welding heat source   S.Shobako … 817

75   Characteristics of voltage for twin torch plasma arc as function of current and arc length   Y.Yuza … 818

76   (Invited lecture)
     Burr removal process using arc discharge   K.Kusumoto   … 819

77   Observations of GTA plasma constricted by CO2 shielding gas   E.Sakamoto … 820

78   New deoxidation method of steel utilizing interfacial free energy difference.   K.Wasai … 821

79   Dependence of interfacial tension on electric potential and migration of metal droplets under electric field   K.Inoue … 822

80   Surface tension of liquid Fe-Cr-O alloys   K.Yamamoto   … 823

81   Effect of Lorentz force on liquid droplets around the slag-metal interface   T.Kozuka … 824

82   Theoretical analysis of isothermal growth of liquid film accompanied by counter diffusion from bounded interface   M.Kurimoto … 825

83   Fine bubble formation from a porous nozzle with vertical wall   K.Okano … 826

84   Investigation of behavior of micro-jets caused by acoustic cavitation in liquid   T.Kubo … 827

85   Effects of bubble attachment to sliding gate on flow in immersion nozzle   D.Maeda … 828

86   Effects of wettability on rising gas-liquid flow in vertical circular pipe    K.Fukushi … 829

87   Kure No.2BF operation with oil injection   N.Sugahara … 830

88   Low RAR operation by injecting high CVL coal   T.Orimoto … 831

89   The high productivity and low coke rate operation at Kakogawa No.3 BF   T.Tagawa … 832

90   Numerical analysis on blast furnace performance under operation with waste plastics injection and top gas recycling   Mansheng Chu … 833

91   Development of high dispersive lance for pulverized coal injection   Y.Kashihara … 834

92   Stabilization of tapping hole length by control of blast furnace raceway depth   Y.Matsui … 835

93   Effect of flow behavior of particle into raceway on raceway formation   M.Sawayama … 836

94   Effects of gasification and smelting reduction on coke degradation   T.Natsui … 837

95   Effects of structural change of coke particle due to solution loss reaction on degradation behavior   S.Sato … 838

96   Low temperature experiments on softening-melting layer formation in packed bed   K.Song … 839

97   Evaluation of reduction behavior in blast furnace with high temperature property estimation apparatus   T.Nishimura … 840

98   Evaluation of fusibility of coal blends containing low-quality coals   K.Masaki … 841

99   Development of carbon composite iron process   K.Fukada … 842

100  The simple selection method of the defective combustion chamber    K.Kojima … 843

101  Smoothing of ceramic welding by reheating   K.Ohta … 844

102  Study and application of sealing material for coke oven chamber   Gan Feifang … 845

103  Effect of sulfur content and molten steel flow on uniformity of shell growth in mold   M.Terauchi … 846

104  Molten steel model experiment on inclusion entrapment in solidified shell   Y.Miki … 847

105  Analysis of initial solidification structure using stainless steel    Y.Kuroda … 848

106  Kinetic analyses of crystallization in CaO-SiO2-CaF2-Na2O glasses    H.Hashimoto … 849

107  Rate-controlling step of heat transfer of mold flux film   H.Nakada … 850

108  Development of anti-entrapment mold flux with Melilite crystal
     (Development of new crystallized mold flux-1)   Y.Tsukaguchi … 851

109  Development of anti-entrapment mold flux with Melilite crystal for round billet caster
     (Development of new crystallized mold flux-2)   M.Adachi … 852

110  Reduction of mold level fluctuation by unsteady bulging at Fukuyama No.5 continuous casting machine   T.Katoh … 853

111  A model of mold level fluctuation of continuous caster caused by unsteady bulging   H.Kitada … 854

112  Improvement of slab conveying flow at No2 continuous caster in Nagoya Works   M.Hayakawa … 855

113  A new dust recycling system at Kimitsu Works
     (Dust recycling at Kimitsu Works-1)   H.Oda … 856

114  Recycling plant of high water content sludge by RHF
     (Dust recycling at Kimitsu Works-2)   H.Oda … 857

115  Effects of operating conditions of coke moving bed filter on collection characteristics for nano scale powder   S.Miyashita … 858

116  Numerical analysis on EAF dust collection by high-temperature coke moving-bed filter   M.A.Ribas … 859

117  Chlorination rate of ZnO with Ar-Cl2-O2 gas and the effect of oxychloride formation   H.Matsuura … 860

118  Morphology of chlorine in a synthetic BF slag and its dissolution behavior into aqueous solution   M.Ito … 861

119  Experimental study on aerosol coagulation in an agitated vessel   H.Bai … 862

120  Swirl motion of stratified two liguid layers in a cylindrical vessel induced by a gas-liguid two-phase jet   M.Shitara … 863

121  (ISIJ Resarch Promotion Grant)
     Dissolution behavior of chromium from chromium containing crystalline phases into seawater   Y.Samada … 864

122  Grinding swarf recycling to reduce environmental load
     (Basic investigation for grinding swarf recycling-1)   K.Nakamura … 865

123  Decomposition of CaSO4 with waste plastic   Y.Hatakeyama … 866

124  (ISIJ Research Promotion Grant)
     The effect of B2O3 on dephosphorization of molten steel by MgO saturated CaO based slag   T.Hamano … 867

125  (ISIJ Resarch Promotion Grant)
     Phase equilibria between 2CaO�SiO2-3CaO�P2O5 solid solution and liquid FetO-CaO-SiO2-P2O5 Slag   S.Hirosawa … 868

126  Effect of oxygen partial pressure on melting and solidifying behavior of CaO-SiO2-FeOx slags   M.Kurashige … 869

127  Molecular dynamics calculation of structural and thermodynamic properties for the CaO-SiO2 and FeO-SiO2 systems   W.Seo … 870

128  Gasification of biomass + hematite mixture and polyethylene + hematite mixture at temperatures between 1673K and 2073K   M.Hasegawa … 871

129  Activities of P2O5 in the CaO-Nepheline-P2O5 system   H.Ozawa … 872

130  Measurement of oxygen activity in molten iron deoxidized with Calcium and Aluminum   K.Taguchi … 873

131  Thermodynamic reassessment of Cu-P binary alloy   T.Noda … 874

132  Evaluation of segregation of B between solid Si and Si-Al melt   T.Yoshikawa … 875


Social Engineering on Iron and Steel Industry

133  Toward the safety and comfortable world
     (Toward the safty and comfortable world-1)   T.Noda … 878

134  Low-risk design of machineries and facilities
     (Toward the safty and comfortable world-2)   M.Ikegami … 879

135  IEC standard railway applications RAMS and its existing state of application in Europe
     (Toward the safty and comfortable world-3)   S.Tanaka … 880

136  The 21 century model practice of the traffic safety policies law in Japan
     (Toward the safty and comfortable world-4)   E.Kanoshima … 881

137  Safety and engineering ethics on wheels and axles for railway vehicles
     (Toward the safty and comfortable world-5)   T.Noda … 882

138  A human factor in the safety of the facilities for travels
     (Toward the safty and comfortable world-6)   K.Marukawa … 883

139  Classification of traffic accidents and countermeasures by a driver model based on detection of risk level   H.Kumamoto … 884

140  Development on road construction materialization process of fly ash    T.Suzuki … 885

141  RDF carbonization system and carbide product   M.Yukumoto … 886

142  Immobilization of Fluorine and heavy metals in incineration dust using BF slag   R.Inoue … 887

143  Origin of domestic steel scrap by type of finised products and furnace
     (History of domestically generated scrap(continued))   S.Hayashi … 888
  
144  Recycling survey on stainless steel in Japan   T.Furuyama … 889

145  Methodologies for recycling of steel products in LCI   K.Yonezawa … 890

146  Application of Markov chain model to analyzing the average number of times of use
     and the average residence time of Fe element in society   I.Daigo … 891

147  Application of Markov chain model to analyzing the average number of times of use
     and the average residence time of japanese forest resource in society   N.Takeuchi … 892

148  Multi-system LCA based on matrix method   K.Nakajima … 893

149  Recovery of material from landfill and waste input-output model   K.Yokoyama … 894


Environmental and Energy Technology

150  (ISIJ Research Promotion Grant)
     Fabrication of Fe-C alloys through reduction and sintering of cementite powders in hydrogen gas atmosphere   K.Nakashima … 896

151  (Invited lecture)
     System design of iron and hydrogen co-production by using Fe3C   E.Inoue … 897

152  (Invited lecture)
     Co-production system of iron and fuel gas from iron carbide   Y.Sakakida … 898

153  (Invited lecture)
     Materialographic investigation on the H2 generation through the iron carbide-steam reaction at low temperatures   M.Hisa … 899

154  Exergy analysis of co-production system of iron and hydrogen by using iron carbide   H.Nakanishi … 900

155  Carbonization reaction behavior of reduced iron pellet with methane   K.Kunitomo … 901

156  Production of iron carbide in CO-H2-base gas-mixtures and production of hydrogen by its reaction with water vapor   Y.Iguchi … 902

157  Effect of catalyst of iron oxide on methane hydrate formation using snow in Hokkaido   M.Takahata … 903

158  Fundamental aspect of nano-sized copper precipitation in ferritic iron-copper alloys   N.Sano … 904

159  Precipitation hardening behavior and mechanical properties of Cu added martensite steel   Y.Nagataki … 905

160  Mechanism for suppression of surface hot-shortness in Cu containing ferritic stainless steel   M.Hatano … 906

161  Grain growth behavior of austenite in Cu-bearing steel   Y.Futamura … 907

162  Precipitation of Cu,Sn and MnS at high temperature in Fe-10%Cu-0.5%Sn alloys   K.Yamamoto … 908

163  Effect of Cu addition on microstructure and mechanical properties in 9%Ni steels   N.Nakada … 909

164  Precipitation of copper sulfides and their effects on mechanical properties in strip casting low carbon steel   Zhongzhu Liu … 910

165  Wettability between molten copper and MnS   H.Shibata … 911

166  Iron and steel scrap flow analysis in Japan   K.Nakajima … 912

167  Domestic material flow for phosphorus including iron- and steelmaking industries   K.Yokoyama … 913

168  Waste plastics recycling process in steel-making industry   K.Kato … 914

169  Monitoring of gas generated from plastics during pyrolysis   M.Nishifuji … 915

170  (Invited lecture)
     Advanced technology and subject of materials in thermal power generation
     (Coal utilized power generation-1)   M.Sato … 916

171  (Invited lecture)
     Advanced technology and subject of materials in thermal power generation
     (High temperature gas turbine technology-2)   M.Sato … 917

172  (Invited lecture)
     The trend of steam turbine and the prospects of material of steam turbine   J.Ishiguro … 918

173  Analysis of creep deformation process of heat resistant steels using positron annihilation lifetime   M.Igarashi … 919

174  Creep properties of several kinds of carbon-free martensitic alloys   S.Muneki … 920

175  Creep strength and microstructure of high-B 9Cr steels containing nitrogen   H.Semba … 921

176  Stability of microstructure for 9% Cr-W ferritic heat resistant steel in long-term actual plant service    T.Muraki … 922

177  Size distribution of BN type inclusions in high Cr ferritic heat resistant steel   K.Sakuraya … 923

178  Steam oxidation resistance in thermal cycle test for pre-oxidized 9Cr steels   H.Haruyama … 924

179  Structural analysis for the protective oxide scales formed on 9Cr heat resistant steels against steam oxidation   H.Kutsumi … 925

180  Microstructure and Creep Strength of Materials for 700°C Class USC Steam Turbines Rotor-1   S.Imano … 926

181  Conceptual design of 700°C class steam turbine and material development items   Y.Tsuda … 927

182  Sensitivity of reheat cracking on austenitic stainless steel containing Nb   H.Okada … 928


Instrumentation, Control and System Engineering

183  The development of an operation support system a raw material yard   N.Iwami … 956

184  Wide area vehicle routing system of steel products   S.Fujii … 957

185  Development of interstand strip walking sensor for hot strip finishing Mill
     (Development of walking control technology in hot strip finishing Mill-2)   Y.Isei … 958

186  Development of walking control method based on model prediction control theory
     (Development of walking control technology in hot strip finishing Mill-3)   Y.Washikita … 959

187  Effect of dual in-mold electromagnetic stirring   R.Hirayama … 960

188  In-mold electromagnetic stirrer designed by applying magneto-hydro-dynamic simulation   K.Yokota … 961

189  Eddy current flaw testing of steel material by H probe with minimal noise   Y.Tanaka … 962

190  Surface flaw testing of steel material by uniform eddy current probe   K.Koyama … 963

191  A portable temperature measurement apparatus for combustion chamber   H.Yamashita … 964

192  Technology for detecting the coating fault on buried pipe   Y.Akechi … 965

193  The development of the uncleanness detector for a coke oven door    H.Matsushita … 966

194  Development of in-line profile meter for shape mill line   M.Matsumoto … 967

195  Development of on line profilmeter of weld bead on ERW steel pipes   T.Kodama … 968

196  New automatic defect classification technique for surface inspection systems   T.Hirata … 969

197  Development of measuring instrument for hot shell ring shape   A.Okamoto … 970


Processing for Quality Products

198  Experimental equipment for super short interval multi-pass rolling and cooling
     (Development of super short interval multi-pass rolling technology for ultra-fine-gained steel-3)   M.Eto … 1023

199  Effect of rolling conditions on grain refinement of hot thin sheet
     (Development of super short interval multi-pass rolling technology for ultra-fine-grained steel-4)   S.Fukushima … 1024

200  Rolling force analyses for producing ultra-fine-grained hot strip
     (Development of super short interval multi-pass rolling technology for ultra-fine-grained steel-5)   T.Sasaki … 1025

201  Effect of cross-roll rolling on charpy impact characteristic of SM490 steel   T.Yamashita … 1026

202  Effect of large complex rolling / bending multiple strain on grain refinement
     (Grain refining investigation by complex rolling / bending multiple accumulation process-3)   T.Hiruta … 1027

203  Grain refinement of pure iron surface by carburization-decarburization reaction   D.Sasaki … 1028

204  Refinement of austenitic grain by reverse transformation   T.Kuroki … 1029

205  Modeling for the prediction of microstructure evolution during and after large reduction forging
     (Grain refinement by large reduction forging technology-4)   M.Miyake … 1030

206  Micro-scale modeling for the prediction of microstructure evolution after severe plastic deformation
     (Integration of different ferrite transformation model-5)   J.Liu … 1031

207  The evaluation of lubricity for continual supply of lubricant on SRV test machine   Xue Wei-dong … 1032

208  Characteristics of liquid colloidal lubricants with solid powder lubricant and inorganic compound-3   J.Ikeda … 1033

209  Numerical simulation of flatness after hot coil cooling   T.Akashi … 1034

210  Development of high-accurate forward slip model in hot finishing rolling   Y.Oki … 1035

211  A method and a skid button for reducing temperature difference in a heating subject and a skid apparatus   Sung Duk Choi … 1036

212  Continuous heating system using electric resistance heating for the rolling of Ti-6Al-4V    R.Izumi … 1037

213  Inverse analysis of flow curve for Nb steel   A.Yanagida … 1038

214  Characteristics of vibration in sheet rolling with ultrasonic oscillation    A.Segawa … 1039

215  Effect of water on oil film thickness between strips and workrolls in strip cold rolling   Y.Aramaki … 1040

216  Effects of oxide scale on plug for piercing properties   Y.Hidaka … 1041

217  Innovative wall thickness control of mandrel mill   A.Yamane … 1042

218  Measuring methods of mechanical properties of high strength steel linepipe   Y.Shinohara … 1043

219  Shape recovery characteristics and strength of pipe joint made of ferrous shape memory alloy   M.Wada … 1044

220  Establishment of totaly reliable quality assurance system for special steel pipes    K.Nakashima … 1045

221  Development of ultra heavy gauged square tube for excellent designing   T.Nagahama … 1046

222  Technique to prolong the seal life of hydorostatic tester at 26 inch ERW pipe mill    I.Hiro … 1047

223  Development of manufacturing technique for H-shapes using cooling system surrounding cross-section   E.Iwai … 1048

224  Improvement of productivity in bar rolling line   R.Tanabe … 1049

225  Evaluation method of material properties for steel tube based on free bulge deformation behavior
     (Evalution of yield stress and n-value-1)   H.Ohmi … 1050

226  Formability evaluation of steel tubes using a simplified hydraulic bulging test   K.Moriguchi … 1051

227  Characteristics of circular tube bending by MOS method   M.Murata … 1052

228  Effect of lubricants in the flaring test of steel tubes   K.Manabe … 1053

229  Tube tension test using image analysis   Y.Yoshida … 1054

230  Ring tensile test for estimating workability of steel pipe   H.Yoshimura … 1055

231  Processability evaluation of the steel pipe for tube forming by rubber bulge processing   T.Tanaka … 1056

232  Evaluation of tube material properties by using the flattening test   A.Hino … 1057

233  Hydraulic bulge test of ERW steel tubes   S.Fuchizawa … 1058

234  Formability of TRIP type high strength tube in tee-shaped forming   S.Sakamoto … 1059

235  Behavior of springback in bending of high strength steel sheets   K.Mori … 1060

236  Springback behavior of high strength steel 3D shape parts
     (Effects of material properties and forming conditions on twisting)   T.Yoshida … 1061

237  Spring back behavior of high strength steel 3D shape parts
     (Improvement of prediction accuracy by microstructure based constitutive model)   N.Suzuki … 1062

238  A evaluation method of formability for pre-strained steel sheet   K.Yoshida … 1063

239  (ISIJ Resarch Promotion Grant)
     Prediction of forming limit of high-strength steel sheets by means of ductile fracture criteria   H.Takuda … 1064

240  Hot press forming of high strength steel sheets using resistance heating   K.Mori … 1065

241  Laser forming of high tensile strength steel sheets   M.Otsu … 1066

242  Springback of high-strength steel after hot/warm sheet forming   K.Oyamada … 1067

243  (ISIJ Resarch Promotion Grant)
     Deformation analysis of shearing using notched bar tension test   Y.Yoshida … 1068

244  Effect of microstructure on machinability of steels   S.Yamamoto … 1069

245  Effect of friction between tool and workpiece on chip formation mechanism   K.Miyanishi … 1070

246  Evaluation method of surface profile created by plunge cutting tool with grooves in low carbon steels   K.Miyanishi … 1071

247  FEM analysis of shrinkage fitting carried out for fabrication of shaped cemented carbide drawing dies   N.Ishizawa … 1072

248  Relationship between the implementation method of the modified cholesky solver and the calculation time
     (Development of the modern interface for FEM analyses of plastic workings-1)   T.Yoshida … 1073

249  Mechanical properties of SKD11 parts made by selective laser melting   M.Otsu … 1074

250  Surface modification of steel by Mg2Si coating via powder metallurgy process   K.Kondoh … 1075

251  Mechanical alloying of cast iron powder using turning chips and its compaction   K.Sugiura … 1076

252  Compressive behavior of iron hollow sphere at elevated temperature   K.Shinagawa … 1077

253  Forming of metal material by powder-binding solid freeform fabrication   H.Kakisawa … 1078

254  Mechanical properties of cold-forged high density sintered materials   N.Nakamura … 1079

255  Miniaturization and mechanical properties of metal injection molding   T.Osada … 1080

256  Development of the Zn-Sb thermoelectric materials by hot extrusion   Y.Yamasaki … 1081

257  Semi-solid state extrusion of steel alloy   S.Sugiyama … 1082

258  Microstructural evolution of austenitic stainless steel SUS304 in semi-solid state   Jingyuan Li … 1083

259  Evaluation of the dynamic wetting of molten zinc to the steel sheet containing Si and Mn   S.Shimada … 1084

260  Effect of sealing and binder on the peeling resistance of thermal spray coating on WC cermet   S.Midorikawa … 1085


Microstructure and Properties of Materials

261  The effect of the atmospheres on the enriched Cu at the scale/metal interface
     during the high temperature oxidation of a steel containing Cu-2    Y.Kondo … 1262

262  Effects of boron and phosphorus on surface hot shortness in Cu-Sn bearing steel   C.Nagasaki … 1263

263  Evaluation of susceptibility to surface hot shortness based on Cu-enrichment characteristics at grain boundary in steel containing Cu   S.Komazaki … 1264

264  A comparison between Nb- and V- bearing hot rolled high strength steels for automotive use   K.Kunishige … 1265

265  Effect of Mo addition on strength at elevated temperature in precipitation hardening type hot rolled steel sheets   S.Hironaka … 1266

266  (ISIJ Resarch Promotion Grant)Formation of intragranular bainite in steels with simulated HAZ   K.Nakai … 1267

267  Mechanism of abnormal alpha.gif(64 byte) to gamma.gif(58 byte)transformation-1
     (Metallurgical factors affecting abnormal alpha.gif(64 byte) to gamma.gif(58 byte)transformation)   T.Hara … 1268

268  Mechanism of abnormalalpha.gif(64 byte) to gamma.gif(58 byte) trnasformation-2
     (In-situ observation of alpha.gif(64 byte) to gamma.gif(58 byte)transformation by scanning ion microscope)   M.Sugiyama … 1269

269  Behavior of fine particles of deoxidation products in liquid Fe alloy   H.Ohta … 1270

270  Effect of size distribution of deoxidation particles on coarsening mechanism   H.Ohta … 1271

271  Characteristics of size distribution after nucleation in deoxidation process   H.Suito … 1272

272  Effect of particle size distribution on austenite grain growth in Fe-0.05 mass%C alloy deoxidized
     by Mn,Si,Ti,Mg,Zr and Ce   A.V.Karasev … 1273

273  Effect of complex deoxidation by Ti and M(M = Mg,Zr and Ce) on particle size distribution and austenite grain growth   A.V.Karasev … 1274

274  Phase stability of TiS and Ti4C2S2 in steel   H.Mitsui … 1275

275  Phase equilibria in Fe-Nb-S ternary system   T.Sasaki … 1276

276  Simulation of equilibrium shape of ferrite idiomorph at G-T orientations    T.Nagano … 1277

277  Development of integrated retrieval system for materials data bases on the internet -Mat Navi and Matdata.net-   M.Yamazaki … 1278

278  The effect of stress on the long-term phase stability of Ni-base superalloy U720LI   Y.Ito … 1279

279  Creep deformation just after loading in gamma.gif(58 byte)-single phase Ni-20Cr alloy polycrystalline   Y.Nakajima … 1280

280  Stress dependence of creep in Ni-20mass%Cr alloy single crystal with [111] orientation    S.Maeda … 1281

281  Change in orientation with creep deformation in gamma.gif(58 byte) single phase Ni-20mass%Cr single crystals with orientations between three pole positions   S.Kato … 1282

282  Creep properties of cetrifugal casted Ni-based heat resisting alloy,hastelloy-X*   N.Miura … 1283

283  Elevated temperature creep deformation of single crystal Ni-based superalloy, CMSX-4, at 1273K    H.Ootaki … 1284

284  Development of Ni based superalloy with excellent fatigue strength at high temperature   A.Toji … 1285

285  Effect of Mg on hot workability of Ni-Cu-Al alloys   S.Hirata … 1286

286  (ISIJ Resarch Promotion Grant)
     Internal scale formed in Ni-Cr based superalloys by high-temperature sulfidation   K.Kusabiraki … 1287

287  Effect of microstructure changes on cracking behaviors of gas turbine bucket coatings   D.Saito … 1288

288  Relationship between creep rupture properties and fracture morphology on dissimilar welded joint   T.Watanabe   … 1289

289  Effect of carbon content on heat check resistance of 13Cr-Co overlay weld metals   Y.Satoh … 1290

290  Effect of the microstructure and welding process on the creep rupture strength in welded joint of 12Cr ferritic steel   S.Date … 1291

291  Two parameters characterizing the change in substructure during creep   M.Tamura … 1292

292  Effect of microstructure on elastic property in heat resistant steels   K.Sawada … 1293

293  Evaluation of the stability of microstructure in heat-resistant martensitic steels based on the system free energy   T.Kunieda … 1294

294  Extrapolation of long-term creep rupture life by time-temperature parameter methods   O.Kanemaru … 1295

295  Creep strength assessment for ferritic creep resistant steels in consideration of elastic limit   K.Kimura … 1296

296  Interpretation of long-term creep strength decrease based on degradation mechanism in 9Cr-1.8W-0.5Mo-VNb steel   Jae-Seung,Lee … 1297

297  Effects of wire diameter and grain size on tensile properties in austenitic stainless steel wire   T.Fukumaru … 1298

298  Microstructure and mechanical properties of ultrafine grained ferritic stainless steel wire fabricated from mechanically alloyed powder   T.Onomoto … 1299

299  Microstructure and strength of Fe-Cr-Mn-N stainless steels fabricated through mechanical alloying method under nitrogen atmosphere   R.Yamamoto … 1300

300  Properties of Fe-Cr-Mo-N alloy powder fabricated through mechanical alloying method under nitrogen atmosphere
     and strength of consolidated materials   Y.Nakamura … 1301

301  Ridging property of isotropic-structured ferritic stainless steel sheet produced through recrystallization of martensite   T.Tsuchiyama … 1302

302  Effect of hot rolling condition on microstructure and roping of type 430 ferritic stainless steel sheet   J.Hamada … 1303

303  Precipitation behavior of epsl.gif(59 byte)-Cu phase for Cu containing ferritic stainless steel   S.Nakamura … 1304

304  Formation of retained austenite in low carbon martensitic stainless steels   K.Kondo … 1305

305  Nano strength analysis of work-hardened low carbon austenitic stainless steel, 316SS   N.Nagashima … 1306

306  Relationship betweem 0.2% proof stress and Vickers hardness of work-hardened low carbon austenitic stainless steel, 316SS   S.Matsuoka … 1307

307  Effect of deoxidation of grain growth in austenitic stainless steel   E.Ishimaru … 1308

308  Effect of heat treatment on low temperature toughness of reduced pressure electron beam weld metal of SUS316L   H.Nakagawa … 1309

309  Effect of mechanical properties on blanking of metastable austenitic stainless steel   T.Mizoguchi … 1310

310  Effect of Ni on mechanical properties of ultra high nitrogen contained austenitic stainless steel   S.Hamano … 1311

311  Creep property of austenitic stainless steel with lath structure   D.Fukae … 1312

312  Effect of boron on cryogenic properties and hot workability of 12Cr-12Ni-10Mn-5Mo-N steel   K.Ishio … 1313

313  Effects of Nb content and annealing temperatures on strength of ferritic stainless steels   S.Obara … 1314

314  Precipitation behavior and high temperature strength of Nb containing ferritic stainless steel   Y.Inoue … 1315

315  The influence of chromium on mechanical properties and recrystallisation properties of ferritic steels    K.Kimura … 1316

316  Effect of heat treatment on ductility and toughness for Nb added ferritic stainless steel pipes T.Tomita … 1317

317  Reduction of TiO2 using molten salt electrolysis in CaCl2 bath with ZrO2 membrane N.Asahara … 1318

318  Development of welding technology for titanium and dissimilar metals   N.Matsukura … 1319

319  Precision casting of titanium alloys for dental applications and their mechanical properties   T.Akahori … 1320

320  Effect of annealing temperature in nitrogen gas on press formability of commercially pure titanium sheet   K.Takahashi … 1321

321  Microstructural development with aging treatment in nitrogen-absorbed Ti-4mass%Cr Alloy   T.Andou … 1322

322  The characteristics of the Ti-20V-4Al-1Sn alloy produced by+ process   S.Matsumoto … 1323

323  Effect of contact pressure on fretting fatigue characteristics of highly workable titanium alloy with equiaxed alpha.gif(64 byte)
     and widmanstatten alpha.gif(64 byte) structures   Y.Suzuki … 1324

324  Development of a free machining beta titanium alloy   M.Ogawa … 1325

325  Fabrication process and magnetoresistance property of iron-group ferro-magnetic metal nanowires   T.Ohgai … 1326

326  Effect of chemical compositions and manufacturing conditions on permeability in extra low carbon steel sheets   T.Suzaki … 1327

327  Abnormal grain growth of non-oriented electrical steel sheets   Y.Arita … 1328

328  Effect of precipitation treatment before cold rolling on secondary recrystallization in grain oriented silicon steel   Y.Ushigami … 1329

329  Application of CVD method on grain oriented electrical steel   H.Yamaguchi … 1330

330  Effect of coated films on laser-induced strain distribution in Fe-3%Si single crystal   M.Imafuku … 1331

331  Observation of annealed samples of 3%Si-Fe at the early stage of recrystallization using high resolution EBSP    T.Imamura   … 1332

332  (ISIJ Resarch Promotion Grant)
     Dependence of cleavage fracture strength on temperature and plastic constraint   T.Tagawa … 1333

333  Stress analysis of round bar specimen with circular notch by FEM   T.Murakami … 1334

334  Significance of fracture toughness evaluation by round bar specimen with circular notch   S.Fukushima … 1335

335  Damage mechanism for controlling ductile cracking of structural steel    M.Ohata … 1336

336  Ductile crack initiation properties of HT780 and effective damage concept under cyclic straining   T.Kawabata … 1337

337  Effect of texture on correlation between charpy transition temperature and brittle crack arrest transition temperature   T.Handa … 1338

338  Evaluation of inclusions and gigacycle fatigue properties in high-strength steels-1
     (Gigacycle fatigue properties of the prepared steels)   Y.Furuya … 1339

339  Evaluation of inclusions and gigacycle fatigue properties in high-strength steels-2
     (Relation between inclusions and gigacycle fatigue properties of the steels)   Y.Furuya … 1340

340  Evaluation of inclusions and gigacycle fatigue properties in high-strength steels-3 
     (The influence of cleanliness evaluation methods on the estimation of the maximum size of inclusions)   M.Hayaishi … 1341
  
341  Effect of non-metallic inclusion on bending-fatigue of high-carbon steel   S.Tagashira … 1342

342  Fatigue strength of ultra high strength TRIP-aided ferrous steels with bainitic ferrite matrix   T.Muramatsu … 1343

343  Growth process of stage I fatigue crack forerunner in low carbon steel   E.Abe … 1344

344  Mechanism and microstructural features of fatigue fracture in SUS316 steel   M.Tanaka … 1345

345  Cyclic softening behavior of 24Cr-15Ni-4Mn-0.3N steel with partially recrystallized fine grain structure at low temperature   O.Umezawa … 1346

346  Fatigue properties of low alloy steels with plasma gas nitriding   H.Hirukawa … 1347

347  Effect of shot peening on fatigue properties for alloy 718 nickel-based superalloy   E.Takeuchi … 1348

348  Hydrogen absorption behavior of high strength bolt steels under atmospheric corrosion   K.Matsukado … 1349

349  Hydrogen distribution in automobile spring steels after wet-dry cyclic corrosion tests   K.Kobayashi … 1350

350  Effect of aging on susceptibility to hydrogen embrittlement and hydrogen desorption profile of 15-5PH   K.Kobayashi … 1351

351  Effects of pre-strain, charging temperature, and charging time on change in hydrogen states in induction heating quenched
     and tempered martensitic steel   H.Ito … 1352

352  Effect of stress and temperature on hydrogen trapping states and mechanical properties of high-strength steel   K.Nakano … 1353

353  Effect of hydrogen content on fracture stress for high strength steel    M.Wang … 1354

354  Hydrogen absorption properties of austenitic metals hydrogen-charged by electrolysis and high-pressure   N.Yabe … 1355

355  Effect of surface cracks for adhesion of paint film on high strength cold rolled steels
     (Development of high strength steel with better phosphatability-1)   I.Hashimoto … 1356

356  Analysis of the surface oxides on the steels which control phosphatability
     (Development of high strength steel with better phosphatability-2)   M.Nomura … 1357

357  Development of high strength cold rolled steel with better phosphatability
     (Development of high strength steel with better phosphatability-3)   S.Kozuma … 1358

358  Effect of hot rolling conditions on mechanical properties for deep drawable IF HSSs with a strength level of 440 MPa   T.Matsumoto … 1359

359  Effects of Nb and Mo on formability of C-Mn-Al-Si TRIP-aided sheet steels with lath structure matrix   K.Sugimoto … 1360

360  Effect of tensile strength and C content on critical nugget diameter of spot welded joints of 590MPa grade cold-rolled high strength steels    T.Nishibata … 1361

361  Stress-strain curves of mild steel sheets obtained by various methods of the high strain rate tensile test   S.Takagi … 1362

362  (ISIJ Resarch Promotion Grant)
     Crystallographic orientation and mechanical properties of gamma.gif(58 byte) + kappa.gif(61 byte)two phase structure in Fe-Mn-Al-C system   H.Ishii … 1363

363  (ISIJ Resarch Promotion Grant)
     Development of Fe-Mn-Si-Cr shape memory alloy reinforced smart composites   Y.Watanabe … 1364

364  Evaluation of strengthening factors of tempered martensite using nanoindentation   T.Ohmura … 1365

365  Luders deformation in submicron-grained ferrite steels   K.Morita … 1366

366  Effect of chemical composition on curie point and thermal expansion of Fe-Ni-Cr alloy   T.Okui … 1367

367  (ISIJ Resarch Promotion Grant)
     Grain boundary engineering for intergranular corrosion resistant 304 stainless steel   H.Kokawa … 1368

368  Positron annihilation study of the pre-strain effect on Cu-precipitation in Fe-Cu alloys   J.Katsuyama … 1369

369  Precipitation hardening behavior of alloy carbide
     (Precipitation hardening and hydrogen trapping behavior in high strength steels-1)   M.Kosaka … 1370

370  Hydrogen trapping behavior of alloy carbide
     (Precipitation hardening and hydrogen trapping behavior in high strength steels-2)   M.Kosaka … 1371

371  The thermodynamical effect of third alloying elements on cementite precipitation in tempered martensite   G.Miyamoto … 1372

372  Effects of alloying elements on tempering behavior of chromium steels   T.Kaneko … 1373

373  Microstructure of plasma nitrided ferritic stainless steel   A.Yonemoto … 1374

374  Effect of carbon content on ausformed bainite structure in Fe-Ni-C alloys   H.Kawata … 1375

375  Effect of precipitated and soluble boron at austenite on HAZ toughness of low carbon steels with high heat input welding   M.Ito … 1376

376  Result of stamping simulation taking welding simulation into consideration.   A.Ito … 1377

377  Structural materials database based on creep and fatigue data sheet published in NIMS   M.Fujita … 1378

378  Construction of microstructural data base for long-term crept materials   M.Murata … 1379

379  (ISIJ Research Promotion Grant)
     Nanocrystallization in steels by drilling and the mechanism   Y.Todaka … 1380

380  Comparison of nanocrystalline surface layer in steels formed by shot peening   Y.Watanabe … 1381

381  Classification of microstructural evolution during single pass-large strain-high Z deformation of a 0.15 C steel   S.V.S. Narayana Murty … 1382

382  Precipitate Morphology analysis by crystallographic approach and atomic model
     (A crystallographic and atomic modeling of precipitate morphology for ultra-Fine grain refinement) N.Miyano … 1383

383  Effect of initial microstructure on recrystallization behavior in ultralow carbon steel   M.Natori … 1384

384  The influence of rapid annealing cycles on the recrystallisation behaviour of cold rolled ultra low carbon and low carbon steel   T.Kizu … 1385

385  The recrystallization behavior and strain aging phenomenon in baking hardenable steel sheets for automobile outer panel   Heung Seok Ko … 1386

386  Crystallography of ultra-fine-graine structure in super short interval multi-pass rolling
     (Development of super short interval multi-pass rolling technology for ultra-fine-grained steel-6)   M.Wakita … 1387

387  Grain refinement mechanisms due to super short interval multi-pass rolling in stable austenite region
     (Development of super short interval multi-pass rolling technology for ultra-fine-grained steel-7)   K.M.Kawano … 1388

388  Comparison of the dislocation substructure between the cold-rolled lath martensite and equiaxed ferrite in IF steel   S.Morito … 1389

389  Microstructural changes in pearlite steels by plastic deformation   Y.Todaka … 1390

390  Thermo-mechanical treatment for production of superplastic SUS304   M.Katoh … 1391

391  Modelling ferrite, bainite and martensite transformations in high strength steels   K.Hayashi … 1392

392  Effect of Mn addition in steels on the selective surface oxidation behavior of 1mass% Si bearing low C steels
     in recrystallization annealing   Y.Suzuki … 1393

393  The influence of Ni and Cu on the galvanizability and oxidation state of Si,Al and Mn added steel   Y.Takada … 1394

394  Microstructure of alloyed aluminized steel   J.Maki … 1395

395  Dissolution behavior of iron from stainless steels for the storage tank of sake
     (Dissolution resistance of stainless steels for the storage tank of sake-1)   W.Harada … 1396

396  Effect of salt composition on corrosion behavior with molten salts for Si and Mo added austenitic stainless steel
     (Corrosion resistance of stainless steels in waste incineration environment -5)   Y.Nishida … 1397

397  On the applicability of TiO2-based coatings for cathodic protection of type 430 stainless steel   Raghavan Subasri … 1398

398  Stress corrosion cracking behavior of super 13Cr martensitic stainless steels in completion fluids   K.Nakamura … 1399

399  Interaction between galvanized steel surface and resin containing carboxyl groups   T.Takahashi … 1400

400  Results of the 10-year weathering tests of prepainted steel sheet by roof-wall simulated specimen   H.Nomura … 1401

401  Corrosion resistance of the painted steel plate for bridge structures   F.Yuse … 1402

402  Effect of Mn, Ni, Ti on material properties of B added CrMoV steel   K.Miki … 1403

403  Influence of heats, heat-treatments and strain control mode on high temperature fatigue of 2.25Cr-1Mo steels    K.Yamaguchi … 1404

404  Characterization of creep deformation behavior of 2.25Cr-1Mo Steel by stress change test   S.Nakashima … 1405

405  Stress relaxation property of boron added 9Cr ferritic creep resistant steels   T.Ohba … 1406

406  Development of high chromium steel FR grade by optimizing V and Nb-1
     (Effect of V and Nb contents on mechanical properties in high chromium steel)   M.Ando … 1407

407  Influences of long term aging and loading on precipitation behavior in high-Cr steels   T.Takanashi … 1408

408  Phase equilibria between austenite and (Nb,V)(C,N) in 9Cr-1Mo-V-Nb steel   M.Yoshino … 1409

409  Hydrogen dissolution into high chromium ferritic steels during high temperature steam oxidation
     and its suppression by the impurity sulfur in steels   M.Nakai … 1410

410  Property of long term used Mod.9Cr-1Mo steel-1
     (Creep deformation of long term used material)   K.Kubushiro … 1411

411  Property of long term used Mod.9Cr-1Mo steel-2
     (Life evaluation by Ω method)   T.Ito … 1412

412  Creep life evaluation based on hardness method of high-Cr ferritic steels   Y.Kadoya … 1413

413  Influence of B on microstructure change after creep in high Cr ferritic steel Y.Hirakawa   … 1414

414  Relation between distribution and strengthening effect of MX particles in ferritic heat resistant steel   M.Taneike … 1415

415  An effect of thermomechanical heat treatment in the magnetic field on the long term creep properties
     and microstructures of a high-Cr ferritic heat resistant steel   H.Okubo … 1416

416  Influence of Ni addition on microstructure and creep strength of solution treated 15Cr ferritic steels   Y.Toda … 1417

417  Alloy design of sulfide shape controlled free cutting low carbon steel on the basis of the calculated phase diagrams
     (Development of free cutting low carbon steel without lead addition-1)   T.Murakami … 1418

418  Development of high strength steel with superior machinability for induction hardening   S.Nakamyou … 1419

419  Effect of Ni and Cr content on toughness in low alloy steel for large forgings   S.Fukaya … 1420

420  Effect of grain size on rolling contact fatigue life in bearing steel   K.Ueda … 1421

421  Change of retained austenite on formation process of white etching area under rolling contact   H.Harada … 1422

422  Microstructure change of carburized and quenched SCr420 steel by micro particle shot peening   S.Takagi … 1423

423  Properties of the rails made at Yawata Works in the latter 20th century   H.Masumoto … 1424

424  Relationship between yield stress and microstructure of high carbon steel wires    S.Nishida … 1425

425  Texture change with restoration of a ferrite steel after large strain deformation
     (Application of neutron scattering to steel research-8)   T.Suzuki … 1426

426  Effect of texture on elastic heterogeneity in pearlite steels
     (Application of neuroton scattering on steel research-7)   S.Morooka … 1427

427  Microstructure and mechanical property of a high speed steel wire   T.Ueyama … 1428


Process Evaluation and Material Characterization

428  Elemental analysis of iron and steel by solid-phase extraction using a masking reagent   S.Hasegawa … 1484

429  Determination of borate and boron nitride by ETV-ICP atomic spectrometry   H.Kataoka … 1485

430  Determination of silver in steels
     by electrically heated quartz tube atomization atomic absorption spectrometry with gas-phase sample introduction method   A.Matsumoto … 1486

431  Removal of an iron matrix by use of an XAD-4 resin coated with a polyoxyethylene-type surfactant   H.Matsumiya … 1487

432  Automation of acid sample preparation - glass bead method   M.Aimoto … 1488

433  Application of laser ablation ICP-MS to steel analysis   T.Ishida … 1489

434  Analysis of organic materials on metal surface by infrared emission spectrometry   Y.Fujioka … 1490

435  Development of real time monitoring instrument for trace gas analysis based on jet-REMPI technique   S.Hayashi … 1491

436  The study of micropores in coal using Xe and hyper-porlaized Xe NMR sprctroscopy    K.Saito … 1492

437  (ISIJ Resarch Promotion Grant)
     Rapid analysis of composition and size of inclusion particles by laser ablation ICP-MS method   R.Inoue … 1493

438  Development of evaluation method for non-metallic inclusions by high frequency ultrasonic detection   I.Takasu … 1494

439  Precipitation analysis of copper alloy by electrolysis with non-aqueous solvent   N.Hara … 1495