The 160th ISIJ Meeting
September 25(Sat)∼27(Mon), 2010
at Center for Research and Development in Higher Education
in Hokkaido University, Sapporo Campus

If you hope to see each program in details, you can select under-mentioned fields.

High-Temperature Processes Environmental, Energy and Social Engineering Instrumentation, Control and System Engineering Processing for Quality Products Microstructure and Properties of Materials
Process Evaluation and Material Characterization International Organized sessions Discussion Sessions ISIJ and JIM Joint Sessions Symposium
(Japanese)
The Timetable of the 160th ISIJ Meeting
   September 25(Sat) September 26(Sun) September 27(Mon)
a.m. p.m. a.m. p.m. a.m. p.m.
Room 1
E201
(Int.)Thermodynamics and kinetics for environmentally harmonious refining processes with high speed and efficiency
[Int.1-14](9:30-16:30)
(D)The present state of the steel refining process and the expected future challenges
[D1-10](9:45-16:45)
Hot metal treatment
[78-82](10:10-11:50)
Converter /Secondary refining
[83-88](13:00-15:10)
Room 2
E214
Fundamental of reduction /Ironmaking process enabling low energy consumption
[1-8](9:00-11:50)
Shaft gas injection /CO2 capture /New ironmaking process /Blast furnace control
[9-19](13:00-17:10)
(D)Control of reduction equilibrium for mitigation of CO2 emission of blast furnace
[D11-23](9:20-16:40)
Young engineer session of coke-making /Coal
[89-95](9:30-12:00)
Coke evaluation /Coke oven
[96-101](13:00-15:10)
Room 3
E208
Refractories1· 2
[20-26](9:30-12:00)
Recycling of waste Energy / Slag treatment
[27-33](13:20-15:50)
(Int.)Ironmaking by microwave heating
[Int.15-23](9:00-16:40)
Measurements of thermophysical properties at high temperature and the application into actual processes1· 2
[102-109](8:50-11:40)
Measurements of thermophysical properties at high temperature and the application into actual processes3· 4
[110-118](12:30-15:40)
Room 4
E215
Continuous casting1· 2
[34-41](9:00-11:50)
Inclusion /Fundamentals of solidification
[42-49](13:00-15:50)
Cutting edge of characterization for segregation taking morphology into account
(9:30-16:30) [Charge-free]
Development of in-situ observation1· 2
[119-126](9:00-11:50)
Functions of electromagnetic fields in materials processing1· 2
[127-131](13:10-14:50)
Room 5
E207
-------- -------- Thermodynamics1· 2
[50-55](9:30-11:40)
Transport phenomena1· 2
[56-63](13:30-16:20)
-------- --------
Room 6
E216
-------- -------- Sintering process1· 2
[64-70](9:30-12:00)
Young engineer in ironmaking1· 2
[71-77](13:00-15:30)
Blast furnace phenomena1· 2
[132-138](9:30-12:00)
Young engineer in ironmaking3· 4
[139-145](13:00-15:30)
Room 7
N304
-------- -------- History of culture based on the iron and steel products in Hokkaido
(9:50-16:30) [2,000yen]
-------- --------
Room 8
E217
-------- -------- -------- Magnesium and Energy
(12:55-16:40) [2,000yen]
-------- --------
Room 9
E218
Slag utilization /Seperation of valuable metals and environmental· Cleanup
[146-151](9:20-11:30)
Technology development with a long term perspective on a hydrogen energy society and green energy steel making1· 2/Reduction
[152-162](13:00-17:00)
What is a critical problem today of safety, security and holonomy· /Advanced technology of dust treatment
[163-169] (9:00-11:30)
(D)Development of material strategy model for resources and environment-4
[D24-28](13:30-16:15)
(Int.)Ancient and pre-modern ironmaking in East Asia
[Int.24-28](9:00-12:00)
Japanese sword· Iron &Steel flow analysis /Waste heat· Waste gas
[170-175](13:00-15:10)
Room 10
E219
-------- -------- -------- (D)The future prospects of agent technologies for maintenance and development of the “Field Force” in steel plants
[D29-35](13:00-16:30)
Instrument · System /Control· Process analysis
[176-184](9:00-12:10)
--------
Room 11
E311
Controlling technology for superior machinability -3 1· 2
[185-190](9:20-11:30)
Recent base research of tribology1· 2· 3
[191-201](13:00-17:00)
Hot rolling1· 2
[218-223](9:30-11:40)

(D)Recent trend in control technology of strip profile and flatness
[D36-40](13:00-17:00)

Cold rolling1· 2
[243-249](9:00-11:30)
Rolling · Skinpass
[250-254](13:00-14:40)
Room 12
E308
Behavior of steel materials during welding1· 2
[202-209](9:00-11:50)
Behavior of steel materials during welding3· 4
[210-217](13:00-15:50)
Formability of steel tube and its evaluation method 1· 2
[224-231](9:00-11:50)
Recent development on the powder compaction and sintering1· 2· 3
[232-242](13:00-17:00)
Rolling of large sections /Forging
[255-261](9:30-12:00)
Formability
[262-266](13:00-14:40)
Room 13
E305
Austenitic heat resisting steel 1· 2
[267-274](9:00-11:50)
Ferritic heat resisting steel 1· 2· 3
[275-285](13:00-17:00)
-------- (D)Characteristics and control of biofilm on the materials surface
[D41-50](13:00-17:10)
Giga-cycle fatigue
[400-404](9:50-11:30)
Fatigue · Wear
[405-408](13:00-14:20)
Room 14
E304
-------- Microstructure control 1· 2· 3
[286-295](13:00-16:40)
Modeling /Magnetic properties
[324-328](9:10-11:00)
Phase transformation · Precipitation1· 2· 3
[329-339](13:00-17:00)
-------- Nonferrous material
[409-413](13:00-14:40)
Room 15
E303
-------- Crack propagation /Fatigue · Fracture
[296-304](13:00-16:10)
-------- Functional treatment /Hydrogen· SCC /Corrosion
[340-350](13:00-16:50)
Hydrogen embrittlement1· 2
[414-421](9:00-11:50)
Hydrogen embrittlement3· 4
[422-428](13:00-15:30)
Room 16
E302
-------- Cold rolled sheet steel
[305-309](13:00-14:40)
Hot rolled steel sheets1· 2
[351-357](9:00-11:30)
Magnetic materials and electrical steel sheets1· 2
[358-363](13:00-15:10)
Stainless steel1· 2
[429-436](9:00-11:50)
Stainless steel3· 4
[437-443](13:00-15:30)
Room 17
E310
Thermo mechanical heat treatment1· 2
[310-315](9:30-11:40)
Controlled-forging metallurgy for medium and high carbon steels to fabricate high strength and functionally graded components
(13:00-16:35) [Charge free]
Fundamental construction for research on hydrogen embrittlement
(9:00-16:50) [2,000yen]
Present status and cutting edge in 3D/4D imaging: For realising common and fundamental challenges
(8:30-15:30) [1,000yen]
Room 18
E301
Hot-dip coating /Chemical conversion treatment
[316-323](9:00-11:50)
Fracture behavior and metallurgical factors of structural materials
(13:00-17:00) [1,000yen]
Fundamental approaches for the relation between work-hardening properties and microstructures in steels1· 2
[364-371](9:00-11:50)
Fundamental approaches for the relation between work-hardening properties and microstructures in steels3· 4
[372-381](13:00-16:30)
Inverse utilization and defect suppression of tramp elements and impurities1· 2
[444-449](9:30-11:40)
--------
Room 19
(JIM-Z) S1
-------- -------- ISIJ and JIM joint session Ultrafine grained materials–fundamental aspects for ultrafine grained structures1-4
[J37-46] (9:00-13:40)
Plate and pipe /Medium and high carbon steel1
[450-457](9:00-11:50)
Medium and high carbon steel2
[458-463](13:00-15:00)
Room 20
N2
-------- Surface · State analysis /Environmental analysis
[464-471](13:00-15:50)
Mechanical property1· 2
[382-389](9:00-11:50)
Mechanical property3 /Simulation· Analysis
[390-399](13:30-17:00)
-------- --------
Room 21
N1
Recent advance on rapid analytical method for steel materials
(9:00-12:30) [1,000yen]
(D)Advances of micro-structural analysis for characterizing material properties
[D51-60](13:30-17:10)
Precipitate and inclusion analysis1· 2
[472-478](9:00-11:30)
(D)Recent progress in chemical methods of analysis related to iron and steel making utilizing a flow system and newly developed pretreatment system
[D61-69](13:00-17:00)
(D)New era of neutron scattering and diffraction as a tool for the steel research
[D70-83](8:50-15:30)
--------
Room 22 (JIM-W) Kohgaku-bu, Build. Info.&Sci. Tech., 2nd Flr. A24 ISIJ and JIM joint session
Titanium and titanium alloys1-10

[J1-36] (9/25 10:30~9/27 11:45)
--------
--------   --------   Banquet Sapporo Beer Garden
(18:00-20:00)[8,000yen]
--------   Poster session for students
(12:00-15:00)
ISIJ beer party
(17:30-19:00)
--------  

[      ]:Lecture Number
(       ):Lecture Time
Symposium Please ask to each of symposium room desks directly.


To Previous Page